4/9/2018 1:16 PM | |
Joined: 5/12/2006 Last visit: 5/2/2024 Posts: 22243 Rating: (2981)
|
Hello, have you assign a IP Adress to the fresh PLC? Regards Christoph |
4/9/2018 1:38 PM | |
Posts: 5 Rating: (0) |
Hi, I assigned it as shown in this next picture if thats what u mean. |
4/9/2018 1:50 PM | |
Joined: 3/28/2015 Last visit: 4/19/2024 Posts: 721 Rating: (213) |
Hello, IF CPU IP address: 192.168.40.98 Use PC IP address: 192.168.40.xxx For example: 192.168.40.100 Subnet mask: 255.255.255.0 |
Eng.Mohamed Ibrahim |
|
4/9/2018 3:09 PM | |
Posts: 5 Rating: (0) |
Hey guys, IP address wasnt set on CPU so after seting it it works fine and I have communication. Thanks a lot :) |
This contribution was helpful to1 thankful Users |
10/21/2019 6:13 AM | |
Joined: 5/12/2006 Last visit: 5/2/2024 Posts: 22243 Rating: (2981)
|
hello, you have not started/installed PLCSIM.
Christoph |
Follow us on