8/24/2020 4:25 PM | |
Joined: 8/31/2005 Last visit: 8/20/2024 Posts: 2198 Rating:
|
On page 7 the documentation for the IO-Link Library says: "IO-Link communication modules of third-party suppliers are not supported by this library!" Maybe you should ask FESTO how to access the parameters of IO-Link devices with the FESTO master module. |
|
|
8/27/2020 7:48 AM | |
Joined: 4/30/2010 Last visit: 8/8/2024 Posts: 138 Rating:
|
https://www.festo.com/net/SupportPortal/Files/370234/100012en.pdf so here is the link to an example program, I used the info here to get to my result of being able to use the Siemens FB for IO Linking and write and read from the existing ports... I hope its a clearer picture now :) the whole idea is so that I can recognise if someone places the wrong device in the wrong process, these devices needs to be swopped but they are destinct for a certain process, but they look the same therefor its easy to swop out the wrong one for the wrong process |
Last edited by: Switch_639 at: 08/27/2020 07:56:43 |
|
Follow us on