Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

flying shear

Created by: hamed12580 at: 5/26/2019 2:11 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/26/2019 2:11 PM	Rate (0)
hamed12580 Bronze Member Joined: 2/7/2017 Last visit: 12/13/2019 Posts: 236 Rating: (1)	this is configuring axis in s7T config of flying saw in our company can u help me and explain which axis they have created and why?

Suggestion To thank Quote Answer

5/26/2019 2:25 PM	Rate (0)
hamed12580 Bronze Member Joined: 2/7/2017 Last visit: 12/13/2019 Posts: 236 Rating: (1)	Attachment Untitled.jpg (30 Downloads)

Suggestion To thank Quote Answer

5/27/2019 7:08 AM	Rate (0)
Mister T Bronze Member Joined: 4/28/2015 Last visit: 11/29/2019 Posts: 271 Rating: (20)	Hello, have a look to the following application example. Maybe it will be helpful for you to solve your problem... Application example Technology CPUs: Flying shears with print-mark synchronization based on gear synchronism https://support.industry.siemens.com/cs/ww/en/view/21063352 Technology Template Technology CPUs: Technology Template "Flying shears" https://support.industry.siemens.com/cs/ww/en/view/21062270

Suggestion To thank Quote Answer

5/27/2019 11:13 AM	Rate (0)
miami Platinum Member Joined: 8/31/2005 Last visit: 12/12/2019 Posts: 1876 Rating: (250)	When you open the Axis under AXES you can see the configuration. There you can see which axis type is used. For a flying saw, a you need a syncronous axis.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on