Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

01 generator :^)

Created by: Aret at: 8/16/2007 6:54 AM (11 Replies)

Rating (2)

Thanks 0

Result pages:: |; 1 | 2; |

12 Entries

Entries per page: 10 | all

8/16/2007 6:54 AM	Rate (0)
Aret Posts: 2348 Rating: (248)	Preface: It's quite common problem - make FC/FB that would generate 0 and 1 on exit according to some times. Usually such function has EN_R - work enable, Timeout0 and Timeout1 for timeouts and Tim as TIMER (only 1 timer) variable (set of variables can be different). So i think i wrote perfect code for this thing :^)) It took veryfew STL commands. So it's interesting for me if it could be done better:^) So think this is a kind of mind game. If you wish to join - just write how many STL commands did it take. Of course no subfunctions allowed^) In a week or so i would put my code here.Enjoy%)
Aret Posts: 2348 Rating: (248)
Suggestion To thank Quote Answer

8/16/2007 3:05 PM	Rate (0)
Jeebs Silver Member Joined: 5/22/2006 Last visit: 4/13/2019 Posts: 218 Rating: (27)	Maybe it's just me, but could you elaborate a bit on what its supposed to do? Mind benders are always fun..... Jeebs

Suggestion To thank Quote Answer

8/17/2007 8:50 AM	Rate (0)
Aret Posts: 2348 Rating: (248)	Well, i've met some devices (valves usually), that require such algorithm for work - command oреn for 2 secodns, wait for 3 seconds, then open command again and so on until valve would be opened. It's made to make process smooth - it's technological request.
Aret Posts: 2348 Rating: (248)
Suggestion To thank Quote Answer

8/28/2007 6:48 AM	Rate (2)
Aret Posts: 2348 Rating: (248)	As i promised - here is the code. Maybe it would be usefull for someone... 10 commands for everything!:^) L #Timeout1 A #Pulse JC nw2 L #Timeout0 nw2: X #Tim X #Pulse = #Pulse A #En_r AN #Tim SD #Tim
Aret Posts: 2348 Rating: (248)
Suggestion To thank Quote Answer

8/28/2007 3:35 PM	Rate (0)
trainee Regular Member Joined: 3/27/2007 Last visit: 3/28/2010 Posts: 40 Rating: (1)	Aret, If it's working and it's good, why change? You want to change the times or is it also good you can't change them? Youwanttomakeshortercode? grtz FKIL

Suggestion To thank Quote Answer

8/28/2007 3:41 PM	Rate (0)
Jeebs Silver Member Joined: 5/22/2006 Last visit: 4/13/2019 Posts: 218 Rating: (27)	Hi, He knows it works and he knows its good, he just wanted to know if anyone else could make it shorter/better. Had same approach, but didn't use the X. Thats what makes it alot shorter. Nice one. Jeebs

Suggestion To thank Quote Answer

8/28/2007 3:46 PM	Rate (0)
trainee Regular Member Joined: 3/27/2007 Last visit: 3/28/2010 Posts: 40 Rating: (1)	Jeebs, You also just could use the Clock Memory. That's also short... grtz FKIL

Suggestion To thank Quote Answer

8/28/2007 4:33 PM	Rate (0)
Aret Posts: 2348 Rating: (248)	Yep, thats right - i was interest if better solution exists^) FKIL, with memory byte you are tight to certain times. For example you need "0" for 950msand"1"for1s050ms.Veryinterestingif implementationofthiswouldbe simplewithmemorybyte?Guessnot.... Another thing - these times may change during work by operator - how to handle that?
Aret Posts: 2348 Rating: (248)
Suggestion To thank Quote Answer

8/28/2007 5:23 PM	Rate (0)
trainee Regular Member Joined: 3/27/2007 Last visit: 3/28/2010 Posts: 40 Rating: (1)	Aret, I don't know in what country/industry you work. But where I come from operators are not allowed to make changes in a process. Not until an engineer has approved or production managers or maintenance supervisor and so on, a changeisallowed. You were giving the example of 2 seconds on and 3 seconds off. You could basicly start with clock memory and use regular timers and then extend it. I presume the code won't be usedwith multiple instances? grtz FKIL
	Last edited by: FKIL at: 28.08.2007 17:41
Suggestion To thank Quote Answer

8/29/2007 6:42 AM	Rate (0)
Aret Posts: 2348 Rating: (248)	I work on many projects in different fields. Ok, if engeneer approved changes what do they do? Change programm code? Too difficult for engeneers on sites. And yes, 2 and 3 s is good example, but what about 950ms and 1050ms? I didn't meant multipile instances.
Aret Posts: 2348 Rating: (248)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on