How can send with DP/DP Coupler MD0 from Profibus Network#1 to Profibus Network#2?

could you please tell me:I have an analoge Input :I write Data in MD0,Then the questions is how can send with DP/DP Coupler MD0 from Profibus NETWork#1(CPU-01) To Profibus NETWork#2(CPU-02)?

----------------------------------------------------------------------------------------------------
Split from DP/DP Coupler, how to configure it?.

Dear Vahid-T,

everything you need to know about to send one DW with DP/DP-Coupler to another Network you will find in the manual:

https://industry.siemens.com/dl/files/382/1179382/att_41598/v1/dpdpk_e.pdf

If you have a special problem with the coupler don´t hesitate to post it here.

regards,

Hello Vahid-T;

Please, please take the time to read carefully the posts by our friend fritz, in the original thread you started this question:

https://support.industry.siemens.com/tf/ww/en/posts/dp-dp-coupler-how-to-configure-it/54209?page=0&pageSize=10

They are the best and simplest explanation for the use of DP/DP couplers I have seen in a long time, and they show you that your original question is misleading: you do not "send" data from one network to the other. Master 2 simply reads in data from the DP/DP coupler that is written to the DP/DP coupler by Master 1, and vice-versa.

there are no send/recieve tramittal blocks between the 2 masters, Each one simply reads and writes to its own interface to the DP/DP coupler. That is why each master has a DP/DP coupler in its own Profibus configuration..

Hope this helps,

Daniel Chartier