Industry Online Support
Technical Forum
6/2/2015 1:13 PM | |
Posts: 7 Rating: (0) |
System 840C After reading work zero offset, In Auto and MDA mode machine shows Work Co- ordinate System (WCS). But even after the resetting, display shows Work Co- ordinate System (WCS) only. Machine changes to MCS only after the power off and subsequent referencing. Kindly suggest the solution. DS Rao --------- |
Last edited by: CS Moderator at: 6/2/2015 5:11:24 PMsplitting |
|
Follow us on