Navigation

Need hsp for CPU 1214C 6ES7 214-1HG40-0XB0 V4.2.0

Created by: AlexZ60 at: 4/25/2017 9:07 AM (8 Replies)

Rating (0)

Thanks 4

9 Entries

4/25/2017 9:07 AM	Rate (0)
AlexZ60 Posts: 47 Rating: (3)	I have CPU 6ES7 214-1HG40-0XB0 V4.2.0 and catalog tia v13 sp1 V4.0. I can't load software changes where CPU in run mode.
AlexZ60 Posts: 47 Rating: (3)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ondatr

4/25/2017 9:10 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 1/14/2026 Posts: 22800 Rating: (3073)	Hello, no HSP available. For FW V4.2 you need TIA V14, a support of V4.2 in TIA V13 is not possible. Regards Christoph

Suggestion To thank Quote Answer

4/25/2017 9:22 AM	Rate (0)
#dP Posts: 2826 Rating: (692)	Hello. Configure with Step7 V13 SP1 Update 9 or Step7 SP2. Select firmware V4.1. This is what I do and have seen no ill-effects. (Not saying there will not be for you.) Only a software warning that can be ignored. The updated functionality from V4.2 will however not be available. It will work as-if a V4.1. Bye. - Dan
#dP Posts: 2826 Rating: (692)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users socrames Ondatr

4/25/2017 9:56 AM	Rate (0)
AlexZ60 Posts: 47 Rating: (3)	#dP Hello. Configure with Step7 V13 SP1 Update 9 or Step7 SP2. Select firmware V4.1. This is what I do and have seen no ill-effects. (Not saying there will not be for you.) Only a software warning that can be ignored. The updated functionality from V4.2 will however not be available. It will work as-if a V4.1. Bye. - Dan I have SP1 upd9 but not firmware 4.1
AlexZ60 Posts: 47 Rating: (3)
Suggestion To thank Quote Answer

4/25/2017 10:05 AM	Rate (0)
#dP Posts: 2826 Rating: (692)	AlexZ60 I have SP1 upd9 but not firmware 4.1 Hello Alex. When creating a new project or adding a new PLC to a project, you will use "add new device". Selecting a new PLC you will see the description and picture on the right side. The version number has a drop down to select between V4.0 and V4.1. More: In the device configuration - right click on the PLC picture and ask for "change device". Select the part number again. The option will be available to update the version. Bye. - Dan
#dP Posts: 2826 Rating: (692)
Suggestion To thank Quote Answer

4/25/2017 10:05 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 1/14/2026 Posts: 22800 Rating: (3073)	hello, check it again or send us a screen of the installed TIA Portal Packages to control. Regards Christoph

Suggestion To thank Quote Answer

4/25/2017 10:46 AM	Rate (0)
AlexZ60 Posts: 47 Rating: (3)	#dP AlexZ60 I have SP1 upd9 but not firmware 4.1 Hello Alex. When creating a new project or adding a new PLC to a project, you will use "add new device". Selecting a new PLC you will see the description and picture on the right side. The version number has a drop down to select between V4.0 and V4.1. More: In the device configuration - right click on the PLC picture and ask for "change device". Select the part number again. The option will be available to update the version. Bye. - Dan Thank you! Project update OK, but I can't try load it to PLC now. I will try later.
AlexZ60 Posts: 47 Rating: (3)	Last edited by: Min_Moderator at: 4/25/2017 1:25:55 PM Adjust formatting
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users #dP

4/26/2017 10:44 AM

Rate (0)

Posts: 2826

Rating:

(692)

Additional information:

https://support.industry.siemens.com/cs/document/107540156
Update V4.2.1
CPU Firmware update V4.2.1. replaces CPU Firmware update V4.2.0.
CPU firmware update V4.2.1 allows the S7-1200 CPU to accept a project download from STEP 7 V13 (TIA Portal V13) where the project includes high-speed counters (HSCs).

2/22/2018 12:16 PM	Rate (0)
Jen_Moderator Posts: 8171 Rating: (174)	New question published by poolsmith is split to a separate thread with the subject Where can download HSP 6ES7214-1AG40-0XB0_V4.1.1?. Best regards Jen_Moderator
Jen_Moderator Posts: 8171 Rating: (174)
Suggestion To thank Quote Answer

Share this page:

Share this page on...

SiePortal

Need hsp for CPU 1214C 6ES7 214-1HG40-0XB0 V4.2.0

Created by: AlexZ60 at: 4/25/2017 9:07 AM (8 Replies)

Rating (0)

Thanks 4

9 Entries

AlexZ60

This contribution was helpful to

ChristophD

#dP

This contribution was helpful to

AlexZ60

#dP

ChristophD

AlexZ60

Last edited by: Min_Moderator at: 4/25/2017 1:25:55 PM

This contribution was helpful to

#dP

Jen_Moderator

9 Entries

Follow us on

SiePortal

Created by: AlexZ60 at: 4/25/2017 9:07 AM (8 Replies)

Rating (0) Thanks 4

9 Entries

This contribution was helpful to

This contribution was helpful to

Last edited by: Min_Moderator at: 4/25/2017 1:25:55 PM

This contribution was helpful to

9 Entries

Follow us on

Rating (0)

Thanks 4