Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

IPC427E Problem in boot - The software controller don't startup

Created by: Deltamatic S.A. at: 11/17/2017 12:01 PM (7 Replies)

Rating (0)

Thanks 1

8 Entries

11/17/2017 12:01 PM	Rate (0)
Deltamatic S.A. Experienced Member Joined: 11/3/2011 Last visit: 11/10/2023 Posts: 9 Rating: (0)	[snip] But now I have a problem in boot. The software controller don't startup and have to do windows startup repair ------------------------------------------------------------------------------------------ Split from SIMATIC S7-1500 Software Controller Installation Error in IPC427E .
	Last edited by: Deltamatic S.A. at: 11/17/2017 12:05:35 PM Last edited by: Jen_Moderator at: 11/17/2017 12:37:56 PM New subject after splitting and deleted answer of the previous question.
Suggestion To thank Quote Answer

11/17/2017 12:14 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/20/2024 Posts: 22482 Rating: (3039)	Hi, what exactly means: "But now I have a problem in boot. The software controller don't startup and have to do windows startup repair" Any Screen or exact message available? Which Windows Operation System is exactly installed on the IPC? Which SW Controller in which Version you use exactly?
	Last edited by: ChristophD at: 11/17/2017 12:16:27 PM Last edited by: ChristophD at: 11/17/2017 12:16:57 PM
Suggestion To thank Quote Answer

11/17/2017 12:54 PM	Rate (0)
Deltamatic S.A. Experienced Member Joined: 11/3/2011 Last visit: 11/10/2023 Posts: 9 Rating: (0)	When the pc starts, the windows logo appears in black background and the pc crash. Next, a screen appears where you can choose to repair. The IPC brings installed windows 7 Ultimate x64. I'm installing the CPU 1507S F Version 2.

Suggestion To thank Quote Answer

11/17/2017 1:10 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/20/2024 Posts: 22482 Rating: (3039)	Hello, wrong operation system: On IPC427E and IPC477E Windows 7 Embedded Standard 7 (WES7) are being supported https://support.industry.siemens.com/cs/ww/en/view/109746397 Regards Christoph

Suggestion To thank Quote Answer

11/17/2017 1:30 PM	Rate (0)
Deltamatic S.A. Experienced Member Joined: 11/3/2011 Last visit: 11/10/2023 Posts: 9 Rating: (0)	Hi, according to I read it seems that now is supported Windows 7 Embedded Standard 7 (WES7). Are you sure that it only works with Windows 7 Embedded Standard 7 (WES7)?

Suggestion To thank Quote Answer

11/17/2017 2:00 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 12/20/2024 Posts: 22482 Rating: (3039)	Hello, no i'm not sure. I only use the SW PLC with Windows embeded and have no problems like yours. i'm alos not sure if Windows must be 32bit or 64bit. if you boot the ipc is a bootmenu displayed? have you try all options in the bootmenu? Regards Christoph
	Last edited by: ChristophD at: 11/17/2017 2:03:17 PM
Suggestion To thank Quote Answer

11/17/2017 2:23 PM	Rate (0)
grg Experienced Expert Joined: 3/2/2009 Last visit: 11/4/2024 Posts: 94 Rating: (8)	Hello, please try this: 1) Uninstall software controller and reboot IPC427E 2) Uninstall and remove (check box) the Intel AHCI driver, reboot 3) Check that Intel driver was replaced by the Microsoft AHCI driver 4) Install software controller Hope this helps, GrG

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Deltamatic S.A.

11/17/2017 2:58 PM	Rate (0)
Deltamatic S.A. Experienced Member Joined: 11/3/2011 Last visit: 11/10/2023 Posts: 9 Rating: (0)	Is working after the driver unistall thanks.
	Last edited by: Deltamatic S.A. at: 11/17/2017 2:59:06 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on