Industry Online Support
Technical Forum
Navigation
Rating 
Thanks 0
3 Entries
| 3/8/2018 9:34 AM | |
Joined: 2/12/2018 Last visit: 8/9/2024 Posts: 224 Rating:
|
Hi I have a HMI in my factory, that I want a remote access to up in my office. Is this possible? I have read a little about Sm@rtServer, but I can't get this to work. I followed a toturial on YouTube for the configuration of the HMI. Then I put my LAN-cable from my PC to the HMI, and searched for the HMI's IP-adresse in a webbrowser, but it didn't find anything. Do you guys know, if this is possible? Here are my details: TIA Portal Version V14 SP1WinCC Advanced V14 SP1 TP1200 Comfort CPU 1513-1 PN Best regards |
|
Please don't forget to rate :) |
|
| 3/8/2018 9:57 AM | |
|
Joined: 2/12/2018 Last visit: 8/9/2024 Posts: 224 Rating:
|
I found something on my computer called Sm@rtClient, and know I can access my HMI on my PC. [snip]
|
Last edited by: Jen_Moderator at: 3/12/2018 10:40:32 AMDivision of questions into separate topics. Please don't forget to rate :) |
|
| 3/12/2018 10:39 AM | |
Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating:
|
New question published by Azkaban is split to a separate thread with the subject When try to press on a button, it says no input with a warning triangle. Best regards |
Follow us on