Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

How to start and stop RWF55?

Created by: NikolayUshakov at: 3/14/2019 3:28 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/14/2019 3:28 PM	Rate (0)
NikolayUshakov Member Joined: 5/20/2017 Last visit: 7/7/2023 Posts: 3 Rating: (0)	[snip] TW14, do you know how to start and stop RWF55? ------------------------------------------------------------------------------------------ Split from Where i can find RWF55.60A9 GSD files?.
	Last edited by: Jen_Moderator at: 3/15/2019 10:04:35 AM New subject after splitting. Division of questions into seperate topics.
Suggestion To thank Quote Answer

3/15/2019 10:30 AM	Rate (0)
TW14 Member Joined: 5/28/2018 Last visit: 3/13/2024 Posts: 5 Rating: (1)	As soon as the RWF is parametrized correctly and under voltage it is working. It starts burner if a heat request is recognized.

Suggestion To thank Quote Answer

3/15/2019 1:35 PM	Rate (0)
NikolayUshakov Member Joined: 5/20/2017 Last visit: 7/7/2023 Posts: 3 Rating: (0)	So, to stop RWF55, I have to change temperature setpoint? I think it might be not very fast in emergency situation. But now I see it is the only way according to Parameter list. Very bad feng shui). I see Modbus is much more functional and flexible then Profibus.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on