FC722

Hello

I have an answer about this fireprotect system FC722. I can´t see zone number on display. When i do fake firealarm I see only description i field on display but no number zone. So when i want off zone in menu and don´t know number zone cant see any zone after OK button. I do it step by step from manual. My system have 180 zones programed. I dont want write every zone number to description.

Thank you for help guys

Hi Koficek,

Zone Number are normally created automatically start from number 1 and so on, unless you change it into specific Number.

You should see the zone number under detection tree. If it is not appear as it is , there must be something wrong on your software or program.

please upload you program so we can determine what is wrong with it.

Regards

Hi there,

Can you sent the BDV that you use for this project.

Thanks

Here is normally located.

Make sure under Folder option View you tick the Show hidden file, then you can see the ProgramData folder.

C:\ProgramData\Siemens\F-FX7230\AU_en_2-V5.0\BDV

Thanks

Hello

You go to : C:\ProgramData\Siemens\F-FX7230\XC_xx_2-V7.0\BDV

XC_xx_2-V7.0: depends on the version you have (XC, CZ ....)

Regards