Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

315-2DP commucate with Simotion D435 - missing tab in configuration

Created by: Roberto Fonte at: 3/4/2013 1:11 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/4/2013 1:11 AM	Rate (0)
Roberto Fonte Advanced Member Joined: 3/9/2012 Last visit: 3/14/2020 Posts: 17 Rating: (0)	Hallo timzhou , I have prepared one sample program for communication between Simotion, S7 300 and HMI. I am aslo posting a small write up for this. this will definately help you. With Regards, Abhijit Nikam Attachment:Communication PLC and Simotion.zip Hi , It's no so easy for me . I have both CPU in the same project but don´t appears the tab coupling.
	Last edited by: CS Moderator at: 3/4/2013 4:32 PM new subject after splitting from /tf/WW/en/Posts/49941#top
Suggestion To thank Quote Answer

3/4/2013 3:22 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 4/3/2020 Posts: 17601 Rating: (2125)	Hello, have you booth CPU's on the same PROFIBUS Network? Is the mode of the DP Interface in SIMOTION CPU set to Slave? Regards Christoph

Suggestion To thank Quote Answer

3/5/2013 3:36 AM	Rate (0)
Roberto Fonte Advanced Member Joined: 3/9/2012 Last visit: 3/14/2020 Posts: 17 Rating: (0)	Hi , After many hour I found the solution . See the picture . [url=http://postimage.org/image/ctu72imqz/][img]http://s9.postimage.org/ctu72imqz/LINK_TAB.jpg[/img][/url] On the PLC hardware configuration we need click with the right click on the profibus master network and select the option that you can see in picture. Thank you guys ,

Suggestion To thank Quote Answer

3/5/2013 7:09 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 4/3/2020 Posts: 17601 Rating: (2125)	nice, this solution is already posted in the Thread /tf/WW/en/Posts/49941#top Post Number 2

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on