Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

505 Workshop

Created by: Siemens_User2 at: 9/6/2006 8:23 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

9/6/2006 8:23 AM	Rate (0)
Siemens_User2 Advanced Member Joined: 6/27/2006 Last visit: 6/4/2018 Posts: 96 Rating: (0)	Not sure if im in right area for this question. in TI 505 Workshop, 1)I have made a SFS call from an SF. Then i deleted the call from the SF, but the SFS is still executing. 2)I disabled the SFS when it was being called, by unticking the box in the headder, and all the SF's stopped processing. Thanks for help in advance.[:D]
	Expert n. 1) X=unknown quantity, Spurt=A Drip under Pressure. There are 10 kinds of people in the world. Those who understand binary, and those who don't.
Suggestion To thank Quote Answer

9/6/2006 4:53 PM	Rate (0)
Cicero Gold Member Joined: 10/10/2005 Last visit: 9/30/2019 Posts: 1388 Rating: (84)	Hello, regarding to your inqury we would like to inform you, but I think we have not still understand your problem. If you call a SFC in a FC and after programming the in- and output parameters and savingso it will be inserted this SFC in the block container. If you delete the SFC-Call in the SFC, this SFC in the block container will be not deleted. But if you load the STEP 7 program with the FC without SFC-CALL, this SFC will not have influence then. In refer to your second question, which SFC have you disabled? Please consider, you have to load the STEP 7 program or all changed modules in your CPU, if you have changes in the program. Othersite we recommend to check whether is there a time stamp conflict in your STEP 7 program. We recommend to make the check block consistency and compile the complete program in the check block consistency dialog. After load the complete STEP 7 program in the CPU again and try again. With best regards Cicero

Suggestion To thank Quote Answer

9/7/2006 2:12 AM	Rate (0)
Siemens_User2 Advanced Member Joined: 6/27/2006 Last visit: 6/4/2018 Posts: 96 Rating: (0)	Cicero,. This problem is concerning Texas Instruments, and 505 workshop, not S7. but thanx anyway. Seimen Staines
	Expert n. 1) X=unknown quantity, Spurt=A Drip under Pressure. There are 10 kinds of people in the world. Those who understand binary, and those who don't.
Suggestion To thank Quote Answer

9/20/2006 6:37 AM	Rate (0)
Siemens_User2 Advanced Member Joined: 6/27/2006 Last visit: 6/4/2018 Posts: 96 Rating: (0)	bump...any thoughts pls?[:cry:]
	Expert n. 1) X=unknown quantity, Spurt=A Drip under Pressure. There are 10 kinds of people in the world. Those who understand binary, and those who don't.
Suggestion To thank Quote Answer

10/30/2006 2:42 PM	Rate (0)
Cicero Gold Member Joined: 10/10/2005 Last visit: 9/30/2019 Posts: 1388 Rating: (84)	Hello, regarding to your inquiry we would like to inform you. Consider, if you make changes in the function blocks, it is possible that there will be an time stamp conflict, if the changed block will be called in some function blocks. The called of this changed modul should be updated. We recommend to make the "Block Check Consistency" and here you should compile the complete program in your project. With best regards Cicero

Suggestion To thank Quote Answer

| |

Follow us on