Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

3WL9111-0AT31-0AA0

Created by: Dariusrad at: 4/26/2011 7:59 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

4/26/2011 7:59 AM	Rate (0)
Dariusrad Posts: 3 Rating: (0)	I am going to buy an ETU tester with order No. 3WL9111-0AT31-0AA0....I am Confuse if this devise heve cable to conect to the ETU in Its box or not? My general question is what am i going to recieve? Attachment 3WL_Handpruefgeraet_Rel2.pdf (483 Downloads)
Dariusrad Posts: 3 Rating: (0)	Last edited by: Dariusrad at: 4/26/2011 8:00 AM
Suggestion To thank Quote Answer

7/21/2011 3:31 PM	Rate (0)
Sentronix Posts: 66 Rating: (4)	Dear Dariusrad , As I´m informed actual version of the test device is 3WL9111-0AT32-0AA0. It can be used for the old trip unit (earlier than summer 2007) and for the actual one. The device is supplied with two connecting cables (for both ETU versions). Best regards Sentronix
Sentronix Posts: 66 Rating: (4)
Suggestion To thank Quote Answer

9/5/2011 8:56 AM	Rate (0)
Dariusrad Posts: 3 Rating: (0)	hi thank you sentronix....
Dariusrad Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

11/4/2014 11:19 PM	Rate (0)
edmx Posts: 1 Rating: (0)	hi sentronix. the 3WL9111-0AT31-0AA0 can be used with ETU release 2 with appropiate linking cable?
edmx Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

12/30/2014 9:26 AM	Rate (0)
Sentronix Posts: 66 Rating: (4)	Hi edmx, 3WL9111-0AT32-0AA0 is down compatible and can be used with old and new ETU, it replaces 3WL9111-0AT31-0AA0, however, the old test device (...-0AT31-...) cannot be used with ETU release 2. Best regards Sentronix
Sentronix Posts: 66 Rating: (4)	Last edited by: Sentronix at: 12/30/2014 9:33 AM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on