Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

6GK7343-1CX10-0XE0 FW V3.1 Hardware configuration problem

Created by: madnesssm at: 10/7/2016 4:06 PM (5 Replies)

Rating (3)

Thanks 8

6 Entries

10/7/2016 4:06 PM	Rate (0)
madnesssm Advanced Member Joined: 6/11/2012 Last visit: 2/16/2021 Posts: 30 Rating: (0)	Dear, I have Siemens 6GK7343-1CX10-0XE0 Lean card with firmware V3.1 and i can not find in hardware catalog product with version V3.1, only V3.0. I found in Siemens manual that required software is minimum Step 7 V5.5 + SP3. I have Siemens Step 7 V5.5 + SP4 and there is no product in catalog. I tried with catalog update, but there is no later version than V3.0. Please, can someone help me?

Suggestion To thank Quote Answer

10/7/2016 4:20 PM	Rate (0)
OmegaProjects Silver Member Joined: 11/14/2008 Last visit: 2/10/2021 Posts: 502 Rating: (21)	Here you can download firmware version 3.1 and here is how to install HSP (attachment) Attachment How to install Hardware support package.pdf (1615 Downloads)

Suggestion To thank Quote Answer

10/10/2016 8:21 AM	Rate (0)
madnesssm Advanced Member Joined: 6/11/2012 Last visit: 2/16/2021 Posts: 30 Rating: (0)	Dear, I found it allready and try, but in hardware catalog i can not find version V3.1. You can find screen shot in attachment. Please help. Attachment SCR.jpg (534 Downloads)

Suggestion To thank Quote Answer

10/10/2016 8:48 AM	Rate (3)
ChristophD Grandmaster Joined: 5/12/2006 Last visit: 3/1/2021 Posts: 18848 Rating: (2354)	Hello, there is no HSP or Update available for FW Version V3.1, you must use the V3.0 Catalog entry! Regards Christoph

Suggestion To thank Quote Answer
This contribution was helpful to 8 thankful Users ELake201 Towome keyots Adcsi Claude_David532 minh.nq Dannjh Navnag

11/12/2019 3:25 PM	Rate (0)
hesapci Member Joined: 2/17/2016 Last visit: 11/12/2019 Posts: 1 Rating: (0)	I have same questions. I can not find V3.1. Can I use V3.0. Did any one try this?

Suggestion To thank Quote Answer

11/12/2019 9:38 PM	Rate (0)
Hati Platinum Member Joined: 9/21/2012 Last visit: 3/1/2021 Posts: 2538 Rating: (290)	hesapci I have same questions. I can not find V3.1. Can I use V3.0. Did any one try this? What is written in the previous post?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on