Skip to Content

support.automation.siemens.com | Technical Forum | Thursday, December 12, 2019 7:41:41 PM

6SN1118-0AA11-0AA0card

Created by: VasyaPetrov12081982 at: 12/28/2017 2:36 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/28/2017 2:36 PM	Rate (0)
VasyaPetrov12081982 Member Joined: 12/28/2017 Last visit: 12/28/2017 Posts: 1 Rating: (0)	Hi, We have a problem on our6SN1118-0AA11-0AA0card. there is an"ERROR CODE 7"displayed on the card and we don't know what the error means. Badly need help on how to eliminate this error. What are the things needs to be done? Thank you very much in advance....

Suggestion To thank Quote Answer

12/28/2017 4:00 PM	Rate (0)
nulizhang Platinum Expert Joined: 10/17/2007 Last visit: 12/12/2019 Posts: 2131 Rating: (152)	I attache all error code list. if you have good m/c yesterday and this error just happen, for old m/c possible mechanical issue --that means the motor wants to run but mech. jammed motor no power to run ( ball screw not moving) until Siemens drive speed controller to the limit, check and feed back VasyaPetrov12081982 Hi, We have a problem on our6SN1118-0AA11-0AA0card. there is an"ERROR CODE 7"displayed on the card and we don't know what the error means. Badly need help on how to eliminate this error. What are the things needs to be done? Thank you very much in advance.... Attachment Diagnosis_TS_2.PNG (28 Downloads)
	Please Help me to understand your question!
Suggestion To thank Quote Answer

12/29/2017 5:21 AM	Rate (0)
PISCEAN 2010 Platinum Member Joined: 4/23/2010 Last visit: 12/12/2019 Posts: 5521 Rating: (409)	Hello VasyaPetrov12081982, Please check the motor cable for any interruption, cable short circuit or ground fault if any, if axis mechanic found good, HTH.

Suggestion To thank Quote Answer