Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

7 segment display with S7 PLC

Created by: Saravana kumar at: 2/19/2010 11:02 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/19/2010 11:02 AM	Rate (0)
Saravana kumar Gold Member Joined: 2/6/2009 Last visit: 10/9/2017 Posts: 899 Rating: (105)	Hi, I want to connect a 7 segment to the output of the S7 PLC and the details of the 7 segment display is as given below, Make = Digitek No of inputs = 5 line (i.e five digital outputs are used)
	_______________________________________________________________ Best Regards T.Saravana Kumar "All for the Best"
Suggestion To thank

2/19/2010 1:20 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 9/25/2017 Posts: 10190 Rating: (1132)	Hello Saravana, Look at plc with seven segment . This was discussed before couple of days. Could help. Best regards, Hristo Mihalev

Suggestion To thank

2/19/2010 1:26 PM	Rate (0)
O_Moderator Moderator Joined: 4/24/2009 Last visit: 9/18/2017 Posts: 2756 Rating: (134)	Thread locsed, because question is already discussed in the thread mentioned by UMENCHO, Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

| |

Follow us on