1/12/2010 4:54 PM | |
Joined: 10/17/2007 Last visit: 4/19/2024 Posts: 3969 Rating: (340) |
=============================================== Hi, try menu PART PROGRAM-->PROGRAM HANDLING--> input %915=%920 then SK: COPY; if you wnat copy sub programs input Lxxx=Lyyy check attcahment ch. 3.1.13.4 page 3-61 HTH Attachment368_810T GA3 Operating.pdf (90 Downloads) |
If you like my comments please |
|
1/13/2010 12:39 PM | |
Posts: 3 Rating: (0) |
Thank you very much, we did it.. |