1/13/2008 7:04 PM | |
Posts: 26 Rating: (3) |
I have put new values(reference points) toparameters 34100 for all axisequiped with linear and rotary absolut encoders(set with parameter34210-accordingtothemanuals). I have also confirmed new ref points. There are no faults like before 27000 and 300950 but I machine doesn't want to move to new reference points. Automatic referencing is selected. I'm selecting auto mode and NC-start and nothing moves. There is no fault or message. Maybe I need to check/change other parameters? -ziped pics in attachment. Attachmentreference_points.zip (1242 Downloads) |
1/23/2018 9:08 AM | |
Joined: 6/19/2017 Last visit: 4/25/2024 Posts: 7953 Rating: (162) |
New question published by peeka is split to a separate thread with the subject Trying to reference Z axis on a 5axis machine . Best regards |
My Forum is the place to personalize your profile, |
|
4/8/2018 7:15 PM | |
Joined: 11/26/2016 Last visit: 10/8/2023 Posts: 138 Rating: (3) |
But how can I make referencing for C axis? |
Nothing IS IMPOSSIBLE. |
|
4/10/2018 7:51 AM | |
Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (872)
|
What type of feedback C axis has? Which controller? Which drive? |
Follow us on