Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

S7-1200 webserver default page

Created by: MarjanMM at: 5/23/2013 2:29 PM (7 Replies)

Rating (2)

Thanks 3

8 Entries

5/23/2013 2:29 PM	Rate (1)
MarjanMM Posts: 51 Rating: (1)	Hello everyone! Is it possible that when I type my IP of the PLC it show's my user defined page and not the default page of the Siemens PLC? Best regards
MarjanMM Posts: 51 Rating: (1)
Suggestion To thank Quote Answer

5/23/2013 7:00 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 11/14/2024 Posts: 4352 Rating: (1452)	Hi, ~~I tihink that is not possible.~~
	Last edited by: Pegaia at: 5/26/2013 8:56 PM I made a mistake: I thought that to go to web page you needed to be logged first. Last edited by: Pegaia at: 5/26/2013 8:55 PM Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

5/25/2013 7:42 PM	Rate (0)
UserNic Advanced Member Joined: 11/10/2009 Last visit: 12/11/2020 Posts: 3 Rating: (1)	Hello, It is possible. In your browser type: "your plc ip/awp/"your application name"/"your default HTML page". Example: 192.168.0.200/awp/automation/index.html Greetz

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Denilson Pegaia Tomy Master

6/25/2013 4:13 PM	Rate (0)
Fredoavelo Posts: 7 Rating: (0)	hi i have the same problem. i don't want that the customer try to reatch other pages he only need to see an user defined alarm page and afther login he can walk trough other pages best regards
Fredoavelo Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

6/25/2013 4:54 PM	Rate (1)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 11/19/2024 Posts: 15406 Rating: (2446)	Fredoavelo hi i have the same problem. i don't want that the customer try to reatch other pages he only need to see an user defined alarm page and afther login he can walk trough other pages best regards A couple of options exist if you do not want to expose the other pages. Set the password and do not tell them the password - then they cannot login and change anything. Or, if that is not sufficient, write a custom vb.net PC app to handle the PLC/PC data gathering and make it available to the user rather than a web page. Probably other solutions available but those seem simple enough. The simplest is just giving the user a favorite/bookmark to your custom web page and have the system auto-redirect any web page to your plc back to your custom web page. I'm not the best web programmer by far, but it seems fairly simple to configure a browser to disable specific pages.
	science guy
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ton Verra

10/28/2013 9:30 AM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 8/20/2024 Posts: 2682 Rating: (135)	New question splitted to S7-1500 webserver default page Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank Quote Answer

6/20/2017 5:42 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by NademiMohammadreza is split to a separate thread with the subject Webserver, access rights for login page. Best regards Min_Moderator

Suggestion To thank Quote Answer

6/23/2017 2:31 PM	Rate (0)
Jen_Moderator Diamond Member Joined: 6/19/2017 Last visit: 9/6/2024 Posts: 8175 Rating: (172)	New question published by Gad serious is split to a separate thread with the subject Trouble loading my webserver program to PLC. Best regards Jen_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on