Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

program concrete batching plant

Created by: mirip at: 8/31/2013 1:47 PM (14 Replies)

Rating (1)

Thanks 3

Result pages:: |; 1 | 2; |

15 Entries

Entries per page: 10 | all

8/31/2013 1:47 PM	Rate (0)
mirip Gold Member Joined: 6/14/2013 Last visit: 3/18/2023 Posts: 218 Rating: (9)	Hello to all, Please, I'm looking for an example program for automation of concrete batching plant. thank you

Suggestion To thank Quote Answer

8/31/2013 2:22 PM	Rate (0)
BhaPraJ Silver Member Joined: 1/28/2012 Last visit: 7/23/2024 Posts: 519 Rating: (83)	[quote user="mirip"]Hello to all, Please, I'm looking for an example program for automation of concrete batching plant. thank you You may try your Hand on recipe. . And for recipe entry data you may use HMI (OP77 or TP or KTP or MP -- depends on Project Budget)
	Regards, BhaPraJ
Suggestion To thank Quote Answer

8/31/2013 3:24 PM	Rate (0)
mirip Gold Member Joined: 6/14/2013 Last visit: 3/18/2023 Posts: 218 Rating: (9)	thank you for the answer, it is not a party HMI I want, but the part program automation (automating a manual station)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Salmanv7x

8/31/2013 7:53 PM	Rate (0)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 12/13/2024 Posts: 5697 Rating: (715)	Hello, Do you really want to do that with a 200 plc or did you just post in the wrong part of the forum. If you tell us a bit more about your application, we could help you with some solutions, i don''t think there is a ready program called concrete batching plant. there will be many solutions to solve parts of the proces. So give us details and we can lead you to a solution. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AutoGen_8388082

8/31/2013 10:00 PM	Rate (0)
mirip Gold Member Joined: 6/14/2013 Last visit: 3/18/2023 Posts: 218 Rating: (9)	thank you for your help. Yes I wish to automate this concrete plant that works in manual. Attached model of the plant (I apologize for the schema by hand). Thank you again. Attachment BATCH.jpg (827 Downloads)
	Last edited by: mirip at: 9/4/2013 11:10 AM
Suggestion To thank Quote Answer

9/1/2013 8:58 AM	Rate (0)
BhaPraJ Silver Member Joined: 1/28/2012 Last visit: 7/23/2024 Posts: 519 Rating: (83)	[quote user="mirip"]thank you for your help. Yes I wish to automate this concrete plant that works in manual. Attached model of the plant (I apologize for the schema by hand). Thank you again. Can you provide how ratio of elements in mixer or quantity will be decided. ?
	Regards, BhaPraJ
Suggestion To thank Quote Answer

9/1/2013 9:57 AM	Rate (0)
mirip Gold Member Joined: 6/14/2013 Last visit: 3/18/2023 Posts: 218 Rating: (9)	[code]Can you provide how ratio of elements in mixer or quantity will be decided. ?[/code] Hello, 0.50 to 1m3 for 1m3 : aggregat~=1900kg ciment ~= 350kg water ~= 150kg adjuvant~= 0-3kg
	Last edited by: mirip at: 9/1/2013 11:57 AM Last edited by: mirip at: 9/1/2013 11:56 AM
Suggestion To thank Quote Answer

9/3/2013 4:25 PM	Rate (0)
mirip Gold Member Joined: 6/14/2013 Last visit: 3/18/2023 Posts: 218 Rating: (9)	Hello Experts, I just finished the program to automate the concrete plant. There are probably a lot of errors. If charitable souls want to take a look and tell me what's wrong (only two types of aggregates). thank you ******** After correction ****
	Last edited by: mirip at: 9/5/2013 11:25 AM Last edited by: mirip at: 9/4/2013 12:12 PM Last edited by: mirip at: 9/4/2013 12:08 PM
Suggestion To thank Quote Answer

9/3/2013 7:59 PM	Rate (1)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 12/13/2024 Posts: 5697 Rating: (715)	Hello, First thing i have noticed: You will have a problem with the timers, you used the wrong numbers, that's why there is no time value in the timer displayed. There are timers of 1ms: timer32 and 96 10 ms timer 33-36 and timer 97-100 100ms timer 37-63 and timer 101-255 Time value = PT X 1, 10 or 100 ms. Second thing is that you can't start timers with the same number in different networks. In OB1 (main) the blocks must be called with a contact, you can use SM0.0 (Always on) for that. Regards, Marcjan Attachment example.jpg (710 Downloads)
	Last edited by: Marcjan at: 9/3/2013 8:25 PM Last edited by: Marcjan at: 9/3/2013 8:11 PM Last edited by: Marcjan at: 9/3/2013 8:06 PM Last edited by: Marcjan at: 9/3/2013 8:04 PM Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

9/3/2013 10:37 PM	Rate (0)
mirip Gold Member Joined: 6/14/2013 Last visit: 3/18/2023 Posts: 218 Rating: (9)
	Last edited by: mirip at: 9/7/2013 11:18 AM Last edited by: mirip at: 9/3/2013 10:38 PM
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on