Add any number of virtual connections?

KSN

Hello.

If you want to add virtual connections between 2 CPU, then right-click on free output of NOP8 FB, select 'Interconnection to address...', select 'Vitrtual connection', in drop-down list select your virtual connection name 'BXDXX0', in 'Sequence number' enter next free number (e.g. 7, 8), press Ok. On the CPU-receiver create the same virtual connections, but at inputs of FB. You need to compile and download program for both CPU's.

 Sir, can i add any number which is not connected in this card virtually right?? 

------------------------------------------------------------------------------------------
Split from Transfer Data from One LFE to other(virtual connection) .

KSN

Hello.

Yes, you can add any number of virtual connections, but remember that total size of buffer memory is 8MB.

 Sir,  

      Where I can check the total size? Is there any option to check what is the size now and how much size is free?? 

KSN

From manual:

The number of channels can be roughly calculated according to the following equation:

● Per Refresh/Multiple channel: 150 bytes + 2 x number of user data bytes (size of the

virtual connection)

● Per Handshake/Select channel: 150 bytes + 1 x amount of user data bytes

Also try to look in HWConfig 'Module Information' for the CP which is used as buffer memory when online connected to the CPU, may be here is some info available.

 Okay sir I will check but today I have checked our CPU551 in HWconfig. Its description is showing 32 MB that why I am asking you. 

Secondly, if I send more data so is there any alarm or message provision or how can I check my memory buffer

KSN

32MB is memory of CPU551. I told you about buffer memory which is located on CP50M0/CP50M1/CP51M1/CP53M0 module. Look for CP Module Information.

From your screen I see only 6 virtual connections of real type, 6x4=24 bytes. I don't think you could achive 8MB. And if you exceed this limit I think you will get communication error on CPU ('C' on CPU dot-matrix led).

6 virtual connections is only in one chart. There are many charts. Tomorrow I will check CP module information.  

Sir, if I add virtual connection between one TDC to another so which CP data is store? Transmit end or receive end? 

KSN

Harry55

 Sir, if I add virtual connection between one TDC to another so which CP data is store? 

 Buffer memory is used on the CP at which is configured @GLOB FB.

Harry55

Transmit end or receive end?

What do you mean?

Sir we have 2 stand and each stand have 4 CPU551 and I want to send data to 2nd stand CPU551 card. Also where I find configured #GLOB FB.?