9/16/2021 5:27 PM | |
Joined: 2/28/2011 Last visit: 11/3/2023 Posts: 16 Rating: (0) |
Yes thank you. I am familiar with this. |
9/16/2021 5:34 PM | |
Joined: 12/18/2014 Last visit: 4/26/2024 Posts: 32890 Rating: (4066)
|
In attachment a possible solution. |
Last edited by: ixo65 at: 09/16/2021 17:38:18 |
|
9/16/2021 5:37 PM | |
Joined: 12/18/2014 Last visit: 4/26/2024 Posts: 32890 Rating: (4066)
|
Sorry, I 've forget to set to AQ1 to 4-20 mA. Here's the corrected file. AttachmentPressure_control_FS4.zip (486 Downloads) |
This contribution was helpful to1 thankful Users |
9/16/2021 6:02 PM | |
Joined: 12/18/2014 Last visit: 4/26/2024 Posts: 32890 Rating: (4066)
|
No problem. How many setpoints want you? It's not much work to make. Answer and I make you a new example with this. |
9/17/2021 9:56 PM | |
Joined: 2/28/2011 Last visit: 11/3/2023 Posts: 16 Rating: (0) |
60 psi 75 psi 90 psi |
9/18/2021 5:46 AM | |
Joined: 12/18/2014 Last visit: 4/26/2024 Posts: 32890 Rating: (4066)
|
Here's the next one. If not pressed I2 or I3 then is the setpoint 60.0 psi. I make a second message text. You can scroll between the message texts with the cursor up and down keys. In the message text "Set setpoints" can you change the setpoint values via the display. AttachmentPressure_control_FS4_V2.zip (308 Downloads) |
This contribution was helpful to1 thankful Users |
Follow us on