Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

archive error

Created by: brett32i at: 3/8/2006 2:08 AM (15 Replies)

Rating (5)

Thanks 8

Result pages:: |; 1 | 2; |

16 Entries

Entries per page: 10 | all

11/23/2011 7:56 AM	Rate (0)
neel595 Posts: 1 Rating: (0)	Recently i also faced the same problem.. the problem is due to the size of the project folder jus check its properties.. if its larger than 5-7 gb then just cut paste the folders in Archive Manager from WinCC folder to somewhere else. then try archiving.. folder path of Archive manager "Project Folder">"WinCC proj folder">wincproj>OS>Archive Manager then jus cut paste the contents of all three folders "AlarmLogging","TagLoggingFast","TagLoggingSlow" somewhere else and then try archiving your project..
neel595 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

4/1/2014 10:21 AM	Rate (0)
LaughingGor Posts: 11 Rating: (0)	thank you very much,a good advice ,it works
LaughingGor Posts: 11 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users S_Moderator

6/24/2014 10:56 AM	Rate (1)
Nicolai_K Regular Member Joined: 6/24/2014 Last visit: 2/9/2021 Posts: 2 Rating: (1)	Hallo! It is necessary to folder c:\Program Files\Siemens\Step7\S7BIN add file pkzipc.exe and change the archiver Option\Arhiving\ PKZip Best regards. Nicolai. Attachment 1111.ZIP (207 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Alpyolcu XvnS

8/21/2015 11:23 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4992 Rating: (121)	New question published by Shahjee is split to a separate thread with the subject Trouble in archiving a program. Best regards Min_Moderator

Suggestion To thank Quote Answer

9/3/2016 3:37 AM	Rate (0)
luciano89cosimo Posts: 1 Rating: (0)	Hi all, the project folder must be without Space. Close step7, rename the main folder and try to archive. That's it !
luciano89cosimo Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

1/24/2017 11:36 AM	Rate (0)
AutoGen_8913253 Posts: 1 Rating: (0)	Hello, I had the same problem and solved it with the advice given above. Thanks ! You can have a message like this "Error 3020:35", with the help message sending you into the wrong direction: "Description of Error: The archive program has not understood the command from STEP 7. This suggests that an older version of the archive program not supported by STEP 7 is installed. STEP 7 supports the following versions of the archive programs [...]" So you have to shorten your program name/path, for example "C:\PLC\Process_D", and after that you can archive it, even with a long archive name. It works fine for me with long archive names like "C:\PLC\Saves\Process_Section_D__2017_01_24__10h25.zip" Hope it helps. J.C
AutoGen_8913253 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on