Hi again all,

Would the same situation apply if I have 4 bytes to convert to a Dint ? 

_Pavel_

Yes )

 I've tried it but from some reason it did not work, will give it another shot.

Boost34

 _Pavel_

Yes )

 I've tried it but from some reason it did not work, will give it another shot.

 To prove this works I have attached a screenshot with a PLC online, in my previous post )

Boost34

Hi All,

I'm currently working on a project where I need to write and read out of a byte array different variables. I got stuck on converting byte to integer and integer to byte. 

If I try to write 15000 to an array of 2 bytes it only writes to one. 

Tried SCL code :

[Code] #Int_Var := INT_TO_BYTE(#HighByte)*256 + INT_TO_BYTE(#LowByte);[/Code] but it didn't work same as

[Code] #INT_Var=Word_TO_INT(SHL(IN:=BYTE_TO_WORD(#HighByte), N:=3) OR #LowByte); [/Code] 

Both of them didn't work, can any one help.

 intVar := byte_to_Int(highByte)*256 + byte_to_int(LowByte);

 ByteArray[0] := int_to_Byte(intVar);

ByteArray[1] := int_to_Byte(intVar/256);

Division by 256 is equal to shift 8 bits right

Multiplication with 256 is equal to shift 8 bits left