Skip to Content

RNF(Antares):lblSharedSiteHeader_Logo_TitleAccessible

RNF(Antares):lblSharedSiteHeader_LoginArea_Register RNF(Antares):lblSharedSiteHeader_LoginArea_Login

Industry Online Support

Technical Forum

RNF(Antares):lblTreeNavigation_Headline

BLD 3 instruction.

RNF(Antares):lblSharedThreadHeader_CreatedBy amursaleen RNF(Antares):lblSharedThreadHeader_Started 3/25/2020 8:43 AM (5 RNF(Antares):lblSharedThreadHeader_Replies)

RNF(Antares):lblSharedThreadHeader_Rating (2)

RNF(Antares):lblSharedThreadHeader_Thanks 0

6 RNF(Antares):lblSharedPager_TotalItemCount_title

3/25/2020 8:43 AM	RNF(Antares):lblSharedPostList_Menutitel_Rating (0)
amursaleen RNF(Antares):lblBadge-Members RNF(Antares):lblSharedPostList_Joined 11/3/2019 RNF(Antares):lblSharedPostList_LastVisit 8/11/2020 RNF(Antares):lblSharedPostList_Posts 4 RNF(Antares):lblSharedPostList_Rating (0)	Hi I need help to understand following STL Program uses CALL, BLD, END CALL instructions. Thanks. RNF(Antares):lblHtmlPost_Attachment CAll.PNG (44 RNF(Antares):lblHtmlPost_DownloadCount)

RNF(Antares):lblSharedPostList_Issue RNF(Antares):lblSharedPostList_AddThankYou RNF(Antares):lblSharedPostList_AddQuote RNF(Antares):lblSharedPostList_AddPost

3/25/2020 9:53 AM	RNF(Antares):lblSharedPostList_Menutitel_Rating (0)
@CIONCO RNF(Antares):lblBadge-EngineerMembers RNF(Antares):lblSharedPostList_Joined 1/17/2013 RNF(Antares):lblSharedPostList_LastVisit 12/26/2020 RNF(Antares):lblSharedPostList_Posts 57 RNF(Antares):lblSharedPostList_Rating (10)	Hi Amursaleen try to write a block call in ladder then visualize it in STL, you will note the BLD3, CALL and END CALL are used by the system just to build up the ladder or FUP representantion ciao

RNF(Antares):lblSharedPostList_Issue RNF(Antares):lblSharedPostList_AddThankYou RNF(Antares):lblSharedPostList_AddQuote RNF(Antares):lblSharedPostList_AddPost

3/25/2020 9:54 AM	RNF(Antares):lblSharedPostList_Menutitel_Rating (2)
Thomas_v2.1 RNF(Antares):lblBadge-BronzeMembers RNF(Antares):lblSharedPostList_Joined 9/15/2006 RNF(Antares):lblSharedPostList_LastVisit 1/18/2021 RNF(Antares):lblSharedPostList_Posts 285 RNF(Antares):lblSharedPostList_Rating (52)	What you see there is not STL, it's MC7 code which is a level below STL. The editor switches to this mode, when the call is corrupted. You cannot edit this code. Between the Call / End Call you see how the parameters are passed in MC7 code. The BLD instructions are there to help the editor how to build the STL code with the FB Call from the MC7 code. But there is not official documentation about this.

RNF(Antares):lblSharedPostList_Issue RNF(Antares):lblSharedPostList_AddThankYou RNF(Antares):lblSharedPostList_AddQuote RNF(Antares):lblSharedPostList_AddPost

3/25/2020 10:05 AM	RNF(Antares):lblSharedPostList_Menutitel_Rating (0)
jacek d RNF(Antares):lblBadge-PlatinMembers RNF(Antares):lblSharedPostList_Joined 9/23/2005 RNF(Antares):lblSharedPostList_LastVisit 1/25/2021 RNF(Antares):lblSharedPostList_Posts 3082 RNF(Antares):lblSharedPostList_Rating (481)	Check out this.
	Regards, Jacek What is confusing you is the fact that you never see a number but always its digit representation. So you end up thinking that the number is the representation. - Andrej Bauer Any claims against me - based on whatever legal reason - resulting from the use of any code and/or ideas presented on this forum shall be excluded.
RNF(Antares):lblSharedPostList_Issue RNF(Antares):lblSharedPostList_AddThankYou RNF(Antares):lblSharedPostList_AddQuote RNF(Antares):lblSharedPostList_AddPost

3/28/2020 6:57 AM	RNF(Antares):lblSharedPostList_Menutitel_Rating (0)
Sachinpatke RNF(Antares):lblBadge-SilverMembers RNF(Antares):lblSharedPostList_Joined 12/9/2010 RNF(Antares):lblSharedPostList_LastVisit 11/18/2020 RNF(Antares):lblSharedPostList_Posts 617 RNF(Antares):lblSharedPostList_Rating (64)	Hi, My advice is not to study this wrong/corrupt code.
	If you like the comment, rate it (right top) or thank it (left bottom). One who says he can & one who says he can't, are both correct-Confusius. Automation- C2C, Management Sachin Patke, India.
RNF(Antares):lblSharedPostList_Issue RNF(Antares):lblSharedPostList_AddThankYou RNF(Antares):lblSharedPostList_AddQuote RNF(Antares):lblSharedPostList_AddPost

3/30/2020 9:09 AM	RNF(Antares):lblSharedPostList_Menutitel_Rating (0)
jacek d RNF(Antares):lblBadge-PlatinMembers RNF(Antares):lblSharedPostList_Joined 9/23/2005 RNF(Antares):lblSharedPostList_LastVisit 1/25/2021 RNF(Antares):lblSharedPostList_Posts 3082 RNF(Antares):lblSharedPostList_Rating (481)	Sachinpatke My advice is not to study this wrong/corrupt code. I completely disagree.
	Regards, Jacek What is confusing you is the fact that you never see a number but always its digit representation. So you end up thinking that the number is the representation. - Andrej Bauer Any claims against me - based on whatever legal reason - resulting from the use of any code and/or ideas presented on this forum shall be excluded.
RNF(Antares):lblSharedPostList_Issue RNF(Antares):lblSharedPostList_AddThankYou RNF(Antares):lblSharedPostList_AddQuote RNF(Antares):lblSharedPostList_AddPost

|

RNF(Antares):lblShareBox_ShareThisPage

RNF(Antares):lblShareBox_ShareOn

RNF(Antares):lblSocialMedia_FollowUs