Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Cable for 545-1104 pcu module

Created by: electrician1 at: 7/31/2008 11:45 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

7/31/2008 11:45 AM	Rate (0)
electrician1 Member Joined: 9/1/2007 Last visit: 10/10/2019 Posts: 8 Rating: (0)	Hi What kind of cable should I use to connect laptop to 545-1104 CPU module, and what is the p/n for that cable Is possible to use standard PPI/PC cable. Thanks

Suggestion To thank Quote Answer

7/31/2008 1:24 PM	Rate (0)
billwest Gold Expert Joined: 6/20/2007 Last visit: 8/4/2018 Posts: 510 Rating: (105)	I have attached 2 pages from the SIMATIC 505 TISOFT 2 Release 6.3 manual with the pinouts for the cable. You can use a standard double shielded null modem RS-232-C cable. Bill Attachment 505prog_cable_pin_out.pdf (207 Downloads)
	Bill West Principal Sales Application Engineer Siemens Industry, Inc. Digital Factory Division
Suggestion To thank Quote Answer

6/26/2009 3:58 PM	Rate (0)
RC30MSH Posts: 1 Rating: (0)	Bill; Is this pinout the same for port 2 (RS232) (DB9F - DB9F) when connected to a PC running Indusoft (HMI) I am having difficulty connecting these two supossedly compatable products ... Mark Hibbard
RC30MSH Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

2/14/2014 10:07 PM
SI_Fish Member Joined: 2/14/2014 Last visit: 2/14/2014 Posts: 1 Rating: (0)	Please note attached pinout pdf file is corrupted

Suggestion Quote Answer

| |

Follow us on