Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Can I use a standard SD memory card in an S7-1500 PLC

Created by: xmnj at: 6/19/2018 1:54 PM (3 Replies)

Rating (1)

Thanks 2

4 Entries

6/19/2018 1:54 PM	Rate (0)
xmnj Silver Member Joined: 9/30/2016 Last visit: 2/10/2021 Posts: 740 Rating: (4)	Can I use a standard SD memory card in an S7-1500 PLC? If that is the case how do I format is to work in the S7-1500 PLC? I know I am also paying for reliability with a Siemens SD card - but if I were willing to risk it on less critical processes.

Suggestion To thank Quote Answer

6/19/2018 2:33 PM	Rate (1)
ChristophD Grandmaster Joined: 5/12/2006 Last visit: 3/4/2021 Posts: 18855 Rating: (2356)	hello, no this is not possible. regards christoph

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users 0_Einstein xmnj

7/18/2018 1:21 PM	Rate (0)
Celio_Goetten Advanced Member Joined: 4/25/2012 Last visit: 12/17/2020 Posts: 8 Rating: (2)	Hello, It´s not possible because Siemens SD card have a special ROM inside. The PLC always check if it´s and won´t boot wiht third party SD Card. Regards Célio

Suggestion To thank Quote Answer

7/18/2018 6:04 PM	Rate (0)
0_Einstein Diamond Member Joined: 7/7/2010 Last visit: 3/4/2021 Posts: 10211 Rating: (1698)	Minor correction: won't run with unauthorized third part SD card Siemens is not the only memory card manufacturer authorized for s7-1200/1500 PLCs. However, they are well known or readily available locally. Celio_Goetten Hello, It´s not possible because Siemens SD card have a special ROM inside. The PLC always check if it´s and won´t boot wiht third party SD Card. Regards Célio
	science guy
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on