Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

cannot open protool 6 sp2 project with protool 6 sp3

Created by: rusli_rusli at: 9/4/2009 8:29 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

9/4/2009 8:29 AM	Rate (0)
rusli_rusli Bronze Member Joined: 3/31/2009 Last visit: 11/23/2019 Posts: 187 Rating: (3)	Hii, i got this error when try to open protool 6 sp2 project with protool 6 sp3, the error was : The require device type "PC" is not supported by the protool version installed.... any idea what wrong? tx rusli attached protool 6 sp2 project Attachment TDOP.zip (67 Downloads)

Suggestion To thank Quote Answer

9/4/2009 9:18 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 12/11/2019 Posts: 7439 Rating: (892)	Dear rusli saja, What Protool version, have you installed? (Protool Lite, Protool or Protool/Pro) Only when Protool/Pro is installed it is possible to open a project for PC Best regards, Wizard

Suggestion To thank Quote Answer

9/4/2009 1:58 PM	Rate (0)
UMENCHO Diamond Expert Joined: 3/21/2006 Last visit: 12/2/2019 Posts: 10197 Rating: (1148)	Hello rusli, Wizard is right. You need Pro version to open PC project. I opened without any problem.(Protool/Pro CS V6.0 SP3). Loo at attachment.

Suggestion To thank Quote Answer

9/4/2009 1:58 PM	Rate (0)
UMENCHO Diamond Expert Joined: 3/21/2006 Last visit: 12/2/2019 Posts: 10197 Rating: (1148)	Hello rusli, Wizard is right. You need Pro version to open PC project. I opened without any problem.(Protool/Pro CS V6.0 SP3). Look at attachment. Regards, Hristo Mihalev Attachment test.JPG (96 Downloads)

Suggestion To thank Quote Answer

9/7/2009 3:56 AM	Rate (0)
rusli_rusli Bronze Member Joined: 3/31/2009 Last visit: 11/23/2019 Posts: 187 Rating: (3)	Dear all, thx for everything, now i can open it.. i guess the problem is lies within my protool, after reinstall it work.. thx rusli

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on