Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Change CUD board in the DC MASTER

Created by: EdFranco at: 3/26/2014 3:00 AM (6 Replies)

Rating (1)

Thanks 0

7 Entries

3/26/2014 3:00 AM	Rate (0)
EdFranco Member Joined: 3/20/2014 Last visit: 6/13/2014 Posts: 3 Rating: (0)	Good Night! In my job We have a DC Master (6RA7075 - 6DV62-0) and yesterday i needed install the (6RA7078-6DV62-0) in the same position. What kind of parameters i need change in relation of the MLFB, because I prefer use the same CUD. Thank's Edson A. Franco

Suggestion To thank Quote Answer

3/26/2014 4:02 AM	Rate (1)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 12/8/2019 Posts: 1940 Rating: (212)	Hello. You need not change CUD1 board, as it does not contain parameters. If your motor remains the same you can upload parameter set from old drive and download to the new drive. But pay attention to reducing rated converter currents in P076. Also check that optimization of all controllers are ok, if not execute optimization runs.

Suggestion To thank Quote Answer

3/26/2014 11:27 PM	Rate (0)
EdFranco Member Joined: 3/20/2014 Last visit: 6/13/2014 Posts: 3 Rating: (0)	Hi! Thank's! But if i have a backup of the parameters the some DC MASTER with a type of MLFB and i need to download in other DC master with diference MLFB, the download of the parameters will be accepted? Because if not i will need to change? Thank you very much!

Suggestion To thank Quote Answer

3/27/2014 4:31 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 12/8/2019 Posts: 1940 Rating: (212)	Hello. Parameters are stored on the board A7005, installed on the Simoreg door. Several parameters are display parameters (read-only) and could not be changed, also r070 (MLFB-number), so I think the download will be accepted.

Suggestion To thank Quote Answer

3/27/2014 11:52 PM	Rate (0)
EdFranco Member Joined: 3/20/2014 Last visit: 6/13/2014 Posts: 3 Rating: (0)	Hi! Ok thank's

Suggestion To thank Quote Answer

4/26/2018 12:04 AM	Rate (0)
ETTAHRIOUI Regular Member Joined: 1/11/2016 Last visit: 8/1/2018 Posts: 25 Rating: (1)	Non messieurs les paramètres sont installés sur la carte Eprom A7009 .
	Save humanity
Suggestion To thank Quote Answer

4/26/2018 12:05 AM	Rate (0)
ETTAHRIOUI Regular Member Joined: 1/11/2016 Last visit: 8/1/2018 Posts: 25 Rating: (1)	ETTAHRIOUI Les paramètres sont installés sur la carte Eprom A7009.
	Save humanity
Suggestion To thank Quote Answer

| |

Follow us on