Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Change screen on HMI from S7-1200 with portal V10.5 ?

Created by: MR2_Canada at: 3/1/2011 8:40 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

3/1/2011 8:40 PM	Rate (0)
MR2_Canada Advanced Member Joined: 1/23/2007 Last visit: 6/21/2021 Posts: 15 Rating: (0)	I try to configure a tag with a DB from PLC like winCC flex (change screen by number) But does'nt work with portal V10.5? Anyone have a other simple solution for me other then complex job mailbox. P.S. Change screen by number link with BD on PLC work pretty well S7-300 vs WinCC flex 2008. Thank

Suggestion To thank Quote Answer

3/1/2011 9:30 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 7/30/2021 Posts: 3997 Rating: (1195)	Hi, Do you have STEP 7 Basic V10.5 SP2 Update 1?
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

3/2/2011 4:39 PM	Rate (0)
MR2_Canada Advanced Member Joined: 1/23/2007 Last visit: 6/21/2021 Posts: 15 Rating: (0)	Yes

Suggestion To thank Quote Answer

3/2/2011 5:20 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 7/30/2021 Posts: 3997 Rating: (1195)	Hi, I don't know what is doing there. I suggest you use 2 tags: a integer with the screen number and a bool, as trigger. in the eventes of the bool tag, on change, use a function to call a screen by number an give the integer variable as parameter Tip: both variables should be "cyclic continous".
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on