Skip to Content

support.automation.siemens.com | Technical Forum | Tuesday, January 19, 2021 1:47:49 PM

Print

Commissioning Guideline Step by Step for Rotary Drum Shear with T400 Card

Created by: Subhro at: 1/12/2012 8:34 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

1/12/2012 8:34 PM	Rate (0)
Subhro Posts: 22 Rating: (0)	Hello Everyone, I am commissioning T400 for Shear Cut with 6RA70 DC master for the first time. Application: Rotary Drum Shear for Head Cut and Tail Cut Configuration: 1.Home position is sensed by Proximity Switch located at the Gear-Box End. It is terminated to terminal 83 (Zero pulse) of T400 and also it is defining the "Start Cut" 2. One number Incremental Encoder at the non-driving end of the motor terminated at CUD Card. Can anybody help me with changed parameter back-up (pdf version will do) of such already commissioned project? Do anybody have a commissioning guidelines step-by-step for such commissioning other than the standard Manual for Shear Cut? Thanking you in advance. Best Regards, Subhradip Dey
Subhro Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

1/17/2012 10:53 AM	Rate (0)
Subhro Posts: 22 Rating: (0)	Can anybody help please??????
Subhro Posts: 22 Rating: (0)
Suggestion To thank Quote Answer

1/17/2012 7:13 PM	Rate (0)
DK. Regular Member Joined: 12/28/2007 Last visit: 7/29/2015 Posts: 22 Rating: (0)	hi... is this T400 with inbuilt software SPS450????

Suggestion To thank Quote Answer

1/18/2012 1:56 AM	Rate (0)
JWilson Experienced Member Joined: 9/16/2008 Last visit: 1/3/2021 Posts: 48 Rating: (3)	I hope these help Attachment DrumShear.zip (111 Downloads)

Suggestion To thank Quote Answer