Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Commissioning TB30 for SIMORION D445

Created by: Urantia at: 11/3/2009 11:02 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

11/3/2009 11:02 PM	Rate (0)
Urantia Experienced Member Joined: 10/23/2009 Last visit: 3/19/2021 Posts: 99 Rating: (0)	Hello, I need you help. I have alreadya sistem with SIMOTION D445 V4.1, but in this controlI have to add a terminal board TB30. The questions is: How add thisterminal in the sofwareSCOUT V4.1.2.0 ? How configure the I/O´s for this terminal? Thanks in advance. greetings.

Suggestion To thank Quote Answer

11/4/2009 5:24 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 4/16/2021 Posts: 18965 Rating: (2373)	Hello, go to the Control Unit of the SINAMICS_Integrated. Open the configuration tab of the Cu and click the yellow Button. Now you can create a OptionBoard for this CU. After creatibg the tb30 is shown under the control unit. The I/O's of the tb30 can be configured in the tabs of the TB30. Regards Christoph

Suggestion To thank Quote Answer

11/5/2009 12:13 AM	Rate (0)
Urantia Experienced Member Joined: 10/23/2009 Last visit: 3/19/2021 Posts: 99 Rating: (0)	Thank you very much ChristophD The advice was of much aid Greetings.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on