Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Complete disassembly of the motor 1FK7083-5AF71-1AA0

Created by: Seeksys at: 8/5/2011 10:51 AM (5 Replies)

Rating (0)

Thanks 0

6 Entries

8/5/2011 10:51 AM	Rate (0)
Seeksys Posts: 2 Rating: (0)	There is a motor 1FK7083-5AF71-1AA0 Is it possible to complete disassembly of the motor (taking out the rotor) Are there any instructions and recommendations for disassembly these motor, and where they can download. Thanks in advance!
Seeksys Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

8/5/2011 12:42 PM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 5/13/2020 Posts: 10198 Rating: (1152)	Hello, I don't think these kind of instructions exist for download. Because there is available like a remedy: "Send to manufacturer for repair" Perhaps some members already made this intervention there and could give an instructions. Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

8/6/2011 9:55 AM	Rate (0)
Ekalavya Platinum Member Joined: 8/4/2009 Last visit: 5/26/2020 Posts: 2958 Rating: (461)	Hello.... Like to know what is the problem had why do you want to disassemble the motor? Yes you can remove the motor re-assemble but it require lot of professional skills....aligning the encoder for matching the current etc ....etc....etc. Best way is to send it for Repair to Siemens.... Regards, Prakash
	With Best Regards, Ekalavya
Suggestion To thank Quote Answer

8/8/2011 6:15 AM	Rate (0)
Seeksys Posts: 2 Rating: (0)	Ekalavya Hello.... Like to know what is the problem had why do you want to disassemble the motor? Yes you can remove the motor re-assemble but it require lot of professional skills....aligning the encoder for matching the current etc ....etc....etc. Best way is to send it for Repair to Siemens.... Regards, Prakash themotor needs to be replaced bearing whether application of a magnetic shunt? thanks
Seeksys Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

8/8/2011 5:26 PM	Rate (0)
Ekalavya Platinum Member Joined: 8/4/2009 Last visit: 5/26/2020 Posts: 2958 Rating: (461)	Complete motor need to be removed / dismantled out for replacing bearing...... Regards, Prakash
	With Best Regards, Ekalavya
Suggestion To thank Quote Answer

3/28/2017 4:32 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 5089 Rating: (117)	New question published by AutoGen_3488400 is split to a separate thread with the subject Motor encoder defect. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on