Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Configure RSE with diagnostics via PROFINET

Created by: Xabiz at: 5/20/2014 9:54 AM (1 Replies)

Rating (0)

Thanks 0

2 Entries

5/20/2014 9:54 AM	Rate (0)
Xabiz Member Joined: 4/2/2014 Last visit: 9/28/2019 Posts: 4 Rating: (0)	Hello, I would like to configure RSE with diagnostics via PROFINET. But I have lack of informations, it is hard for me, to get useful information from f.e. DB generated by RSE. I would like to use this data, but I don't know how. In PROFIBUS it was easier because there was 4 DW describing which slave is failed. And I would like to get similiar information here. Nothing special, only which slaves (IO devices) are failed, to get quick information, where I should start to search and repair. Hard thing is that, I want to create universal tool which will be undependent from number and type of IO devices. Regards Xabiz
	Last edited by: Blue Moderator at: 20.05.2014 11:34 New subject after splitting from /tf/WW/en/Posts/21417#top
Suggestion To thank Quote Answer

5/20/2014 11:51 AM	Rate (0)
H-H Platinum Member Joined: 7/2/2008 Last visit: 12/4/2019 Posts: 923 Rating: (294)	HelloXabiz, Regarding the RSE in general, please read this FAQ. How can you have system error messages from a SIMATIC S7-300 / 400 displayed in WinCC flexible Regarding the Profinet simple diagnostics, I think you need something like this, Diagnostic package PNIODiag for diagnostic evaluation for PROFIBUS DP and PROFINET IO Best regards, H-H

Suggestion To thank Quote Answer

| |

Follow us on