Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Conflicts between industrial and building

Created by: Skaras at: 4/16/2015 2:52 PM (2 Replies)

Rating (1)

Thanks 2

3 Entries

4/16/2015 2:52 PM	Rate (0)
Skaras Regular Member Joined: 7/17/2008 Last visit: 10/20/2020 Posts: 30 Rating: (0)	Hello to everyone, I would like to install in the same pc (win7 pro 64) the programs for building automation (desigo insight 5.1, XWP 5.1...) and the programs for industrial automation (step7 5.5, wincc7.2, flexible, tia portal). Now i am working with virtual machine. In the past, with older versions of both categories, this was't possible, because of conflicts. Does anyone know anything? Thank you in advance Attachment simatic.jpg (210 Downloads)

Suggestion To thank Quote Answer

4/18/2015 10:22 PM	Rate (1)
Albis Silver Expert Joined: 6/4/2010 Last visit: 1/21/2021 Posts: 273 Rating: (66)	Dear Skaras, The parallel installation of the Siemens Industry software Step7, TIA portal etc. and the Siemens Building Technology software XWP (XWORKSplus) or ABT is not supported and not recommended. You may run into a version conflict, if you install it on the same PC. XWP and ABT use components of Step7 respectively TIA portal. We strongly recommend to use either a dedicated, separate PC or the Virtual PC approach as you already mentioned. Desigo Insight does not include the Step 7 / TIA components and is excluded from the statement above. Desigo Insight can be installed on the same PC with all other software above. Best regards, Albis

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Skaras

4/21/2015 9:32 AM	Rate (0)
Skaras Regular Member Joined: 7/17/2008 Last visit: 10/20/2020 Posts: 30 Rating: (0)	Thank you Albis

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Min_Moderator

|

Share this page:

Share this page on...

Follow us on