Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Convert TI545 PLC to TIA portal V13

Created by: gv@support at: 2/16/2016 6:22 AM (1 Replies)

Rating (0)

Thanks 3

2 Entries

2/16/2016 6:22 AM	Rate (0)
gv@support Member Joined: 4/1/2015 Last visit: 7/4/2016 Posts: 2 Rating: (0)	billwest The only way I know to convert the program is to load it into the 505 PLC with SoftShop and then upload it with TISOFT. However the symbol names and LAD comments will not be present. Good Luck, billwest Hi I need to convert TI545 PLC to TIA portal V13, just wondering how to approach to it. Any suggestions. ------------------------------------------------------------------------------------------ Split from Urgent: Convert .FSS file to S7 program.
	Last edited by: Min_Moderator at: 2/17/2016 3:18:06 PM New subject after splitting
Suggestion To thank Quote Answer

2/17/2016 4:15 PM	Rate (0)
billwest Gold Expert Joined: 6/20/2007 Last visit: 8/4/2018 Posts: 510 Rating: (112)	The only way to convert is to first convert the program using the TI505 to S7 converter program. Then migrate the project to TIA Portal. Your issues are: 1. The TI505 to S7 converter does not run on Windows 7 so you must find an xp machine. 2. The conversion/migration does a poor job of upgrading the 80's technology of the 505 to current technology 3. The converter converts 505 LAD to Step 7 STL which is incompatible with 505 users. My recommended option is to have TISOFT/Softshop/Workshop displayed on a screen and TIA Portal on another screen and start coding. Good luck, billwest
	Bill West Principal Sales Application Engineer Siemens Industry, Inc. Digital Factory Division
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users dchartier gv@support Aviator_747

|

Share this page:

Share this page on...

Follow us on