Skip to Content

support.automation.siemens.com | Technical Forum | Tuesday, January 19, 2021 4:30:05 AM

Print

Counting system

Created by: Mohamed Asharaf at: 7/16/2011 10:32 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

7/16/2011 10:32 AM	Rate (0)
Mohamed Asharaf Advanced Member Joined: 12/18/2009 Last visit: 5/19/2018 Posts: 40 Rating: (1)	Can any one help me to create a programme fora counting sistem. I wish to make a programme for counting flour filling from two weighers. These two weighers are weighing flour together with the help of flour conveyors to two individual weighing panand discharging one by one. If i Set a 100 numbers of bags, I have to stop discharging of flour from panin 98, I will make onether option for emptiying and discharging the next two bags. That means my final target is 100 and I have to get an output which can activate in 98. So that I can stop the current weighing sequence and can start onether sequance for next two bag.Can any one make this programme. Once only I will set 100 bags in Logo TD, It must stop in 98 for 1st stage of counting, I will create onether sequence for next two bags because I have to stop this product, and have to start onether product after 100, for that I have to empty this two pans in last two countingand it will continue up to 100 and then stop counting. My request is only to make counting up to set value 100and have to get a break in 98 then counting countinues up to 100 and finishing the counting cycle.
	Last edited by: Mohamed Asharaf at: 7/16/2011 10:39 AM
Suggestion To thank Quote Answer

7/18/2011 9:45 PM	Rate (0)
Toeternietoe Platinum Member Joined: 12/27/2006 Last visit: 1/7/2021 Posts: 1141 Rating: (100)	Its easy Take a counter and make the startvalue +2, thats all. Look at the little program i made for you It counts to 10, but stops at 8 (10-2) inputs on I1 Attachment Teller+2.zip (80 Downloads)

Suggestion To thank Quote Answer

9/14/2012 12:35 PM	Rate (0)
Johnluck Experienced Member Joined: 3/29/2012 Last visit: 12/13/2020 Posts: 55 Rating: (0)	as explain it will actually work for you but if u wanted to reset it automatically, see the attached on how to go about it. Attachment C:\Documents and Settings\ngoyedelek\Desktop\Full page fax print.pdf (51 Downloads)
	johnluck
Suggestion To thank Quote Answer