Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CPU 1200 MONITORING INDIVIDUAL BLOCK IN ONLINE

Created by: DS SURESH KUMAR at: 5/26/2014 12:06 PM (5 Replies)

Rating (0)

Thanks 2

6 Entries

5/26/2014 12:06 PM	Rate (0)
DS SURESH KUMAR Bronze Member Joined: 4/17/2012 Last visit: 9/10/2020 Posts: 474 Rating: (10)	Dear Experts, I am using the CPU-1200 model. TIA 12. Want to know how to monitor individual blocks ? I used Step 7 and know how to monitor the individual call of multi instance blocks. EX : FB 10 = Motor driver block.(Multi instance capabality) FB 11 = Motor calls ( calling FB 10 in FB 11) i can monitor individual calls in Labarotary mode. but please give the procedure in TIA 12

Suggestion To thank

5/26/2014 12:26 PM	Rate (0)
BhaPraJ Silver Member Joined: 1/28/2012 Last visit: 1/5/2021 Posts: 519 Rating: (82)	[quote user="DS SURESH KUMAR"]Dear Experts, I am using the CPU-1200 model. TIA 12. Want to know how to monitor individual blocks ? I used Step 7 and know how to monitor the individual call of multi instance blocks. EX : FB 10 = Motor driver block.(Multi instance capabality) FB 11 = Motor calls ( calling FB 10 in FB 11) i can monitor individual calls in Labarotary mode. but please give the procedure in TIA 12 I am not sure but I think same question is repeated by you. . Correct me If I am wrong. . /tf/WW/en/Posts/94901
	Regards, BhaPraJ
Suggestion To thank
This contribution was helpful to 2 thankful Users DS SURESH KUMAR PDGANGANI

5/26/2014 12:48 PM	Rate (0)
DS SURESH KUMAR Bronze Member Joined: 4/17/2012 Last visit: 9/10/2020 Posts: 474 Rating: (10)	Hi Bhagat, Thanks a lot , but in TIA 13 they have this option?

Suggestion To thank

5/26/2014 1:03 PM	Rate (0)
BhaPraJ Silver Member Joined: 1/28/2012 Last visit: 1/5/2021 Posts: 519 Rating: (82)	[quote user="DS SURESH KUMAR"]Hi Bhagat, Thanks a lot , but in TIA 13 they have this option? Don't have any encounter with TIA V13 yet. So not sure. But you could try "Support Request".
	Regards, BhaPraJ
Suggestion To thank

5/26/2014 9:51 PM	Rate (0)
DvdMeijden Regular Member Joined: 5/28/2013 Last visit: 3/30/2021 Posts: 9 Rating: (3)	I think you need TIA V13 to do this using the 1200 PLC yes 1) Open the FB 2) On the right panel, and select the 'testing' tab 3) Click 'Change' at Call enviroment You should be able to select the call instance you like.
	Last edited by: DvdMeijden at: 5/26/2014 9:53 PM Last edited by: DvdMeijden at: 5/26/2014 9:52 PM
Suggestion To thank

5/27/2014 12:52 PM	Rate (0)
O_Moderator Diamond Member Joined: 4/24/2009 Last visit: 4/8/2021 Posts: 2693 Rating: (135)	Thread closed, because question is already discussed in the following thread Multiple instance monitoring Best regards O_Moderator
	Tips&Tricks for the forum usage
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on