Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CREATION OF NAMEDCONNECTIONS

Created by: mankar at: 8/16/2009 8:04 AM (16 Replies)

Rating (1)

Thanks 2

Result pages:: |; 1 | 2; |

17 Entries

Entries per page: 10 | all

8/24/2009 6:01 PM	Rate (0)
J_Bell Posts: 5822 Rating: (408)	Hello, I wonder, is it possible that you use VM-Ware by any chance? If not... have you installed the SIMATIC NET driver set? Best regards J_Bell
J_Bell Posts: 5822 Rating: (408)
Suggestion To thank Quote Answer

8/24/2009 6:28 PM	Rate (0)
samkcr Bronze Member Joined: 3/24/2009 Last visit: 3/2/2021 Posts: 398 Rating: (3)	Hi... I installed simatic net cd and redconnect software with license. Any problem?
	All is well :-)
Suggestion To thank Quote Answer

8/25/2009 12:50 PM	Rate (0)
J_Bell Posts: 5822 Rating: (408)	Hello, sadly you do not mention if you have VM in use... but it needs to be said that the use of VM Ware is not release for WinCC and it does certainly not work with CP 1613 because on VM Ware you have no access to the Hardware of the host system and CP 1613 does notwork at the client OS. Just to be mentioned. Best regards J_Bell.
J_Bell Posts: 5822 Rating: (408)
Suggestion To thank Quote Answer

2/16/2016 11:58 AM	Rate (0)
BnaguibWadie Posts: 12 Rating: (0)	Dear all , i have the same problem i have working system ( PLC 400 H with 3 IPC each IPC has 2 CP 1623 i ordered New IPC as spare for one of old IPCs so i removed the two CPs 1623 from the old one and fixed it on the new one and got the XDB file and start the Wincc runtime but not communication was established please tell me the steps that i should follow to establish good communication tell me about the logical switch of Named connection ? i found it ( VM ) and no drop menu but i noticed there are drop menu in TCP/IP logical switch is selected ( CP_H1_1: ) please tell me about PG/PC interface what about configuration console settings waiting your reply ASAP regards , Bishoy Naguib autoeng.bishoy@gmail.com
BnaguibWadie Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

2/16/2016 1:44 PM	Rate (0)
bg2492 Platinum Expert Joined: 5/16/2014 Last visit: 4/14/2021 Posts: 6673 Rating: (1822)	Hello BnaguibWadie, you should download the WinCC V7.3: Kommunikation Manual. https://support.industry.siemens.com/cs/ww/de/view/102691766 The configuration of "Named Connections" is described in part 12.5.3.4. Regards Georg Berghof
	PS: If this post did really help you, you may use the Rate-button
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users BnaguibWadie

2/16/2016 3:25 PM	Rate (0)
BnaguibWadie Posts: 12 Rating: (0)	Dear George , i can't define XDB file in set PG/PC -interface i didn't do this step before i found this note on pdf but i can't know how to do this on my lap , set pc/pg doesn't similar to the one on pdf kindly find the image i only imported XDB file in ( station configurator ) waiting your reply ASAP Regards , Attachment define xdb in pg pc interface.jpg (85 Downloads)
BnaguibWadie Posts: 12 Rating: (0)
Suggestion To thank Quote Answer

2/17/2016 9:04 AM	Rate (0)
bg2492 Platinum Expert Joined: 5/16/2014 Last visit: 4/14/2021 Posts: 6673 Rating: (1822)	Hello BnaguibWadie, maybe the following FAQs help: https://support.industry.siemens.com/cs/ww/en/view/8928931 https://support.industry.siemens.com/cs/ww/en/view/7028371 https://support.industry.siemens.com/cs/ww/en/view/100450795 Regards Georg Berghof
	PS: If this post did really help you, you may use the Rate-button
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

WinCC Communication (OPC, S7, OtherSystem)

Follow us on