Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

D410-2 RDY LED

Created by: Hone1DAS at: 2/8/2019 4:24 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

2/8/2019 4:24 AM	Rate (0)
Hone1DAS Regular Member Joined: 2/4/2019 Last visit: 5/15/2020 Posts: 9 Rating: (1)	Hello, I have a D410-2 module. I program the CF card with the firmware version I want, and power ON the unit. The RDY LED is flashing green at .5Hz. The manual says "commissionong/reset", but nothing more specifically. My PC can ping the IP address through profinet, but my Scout(v5.1) cannot find the drive to import into a blank project. Scout find the other 2 drives connected, but not this particular drive. Is there any more specific information on the blinking LED? Maybe if I let it sit it will stop? Is there a time for commissioning to finish?

Suggestion To thank Quote Answer

2/8/2019 5:02 AM	Rate (0)
PhilSiemens1 Advanced Member Joined: 1/16/2015 Last visit: 4/9/2021 Posts: 39 Rating: (1)	The flashing LED means that the drive has not been commissioned

Suggestion To thank Quote Answer

2/8/2019 5:24 AM	Rate (0)
Hone1DAS Regular Member Joined: 2/4/2019 Last visit: 5/15/2020 Posts: 9 Rating: (1)	Doesn't booting with the CF Card do the commissioning?

Suggestion To thank Quote Answer

2/8/2019 5:54 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 4/13/2021 Posts: 18956 Rating: (2371)	Hello, D410-2 have no auto comissioning during boot. You must create a new project, insert a D410-2 in the offline project. Then go online with scout and dowenload simotion part, after that you can go online to the integrated drive and do the comissioning. Regards Christoph

Suggestion To thank Quote Answer

2/28/2019 6:10 PM	Rate (0)
Hone1DAS Regular Member Joined: 2/4/2019 Last visit: 5/15/2020 Posts: 9 Rating: (1)	This issue has been solved. Apparently the firmware version on the CF Card somehow got reverted to the latest. I downgraded the firmware version and everything worked as expected!

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on