Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

D425 2DP/PN went to Stop mode

Created by: Lapmaster at: 11/19/2019 8:37 AM (6 Replies)

Rating (0)

Thanks 0

7 Entries

11/19/2019 8:37 AM	Rate (0)
Lapmaster Regular Member Joined: 11/30/2018 Last visit: 6/16/2020 Posts: 15 Rating: (0)	Hi Experts, I'm facing problem with D425 2DP/PN, the PLC went to Stop mode. One of our machine is at customer end and suddenly machine was not functioning. The Simotion went to Stop mode. How to put that back to RUN mode? Attached the alarm & drive buffers for your reference. Thanks in advance. -Vignesh ------------------------------------------------------------------------------------------ Split from Why goes Simotion CPU to stop mode? . Attachment simotion buffer.xlsx (26 Downloads)
	Last edited by: Jen_Moderator at: 11/19/2019 12:03:14 New subject after splitting
Suggestion To thank Quote Answer

11/19/2019 8:48 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 4/13/2021 Posts: 18956 Rating: (2371)	Hi, Floating-point exception in the user program go online and open the diagnostic buffer, navigate to the Log entry with the floating point. Now lock on the details , here you see unit and line where the exception is occured, check this code! Regards Christoph

Suggestion To thank Quote Answer

11/20/2019 12:53 PM	Rate (0)
Lapmaster Regular Member Joined: 11/30/2018 Last visit: 6/16/2020 Posts: 15 Rating: (0)	HI, Please find the screenshot of the alarm. Here, the line number was shown as N/A. Since, the machine is at our customer site we can go online with only webserver Regards, Vignesh Attachment Details of error.PNG (44 Downloads)

Suggestion To thank Quote Answer

11/20/2019 1:04 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 4/13/2021 Posts: 18956 Rating: (2371)	Hello, have you check in the offline project this code? in this unit? Regards Christoph

Suggestion To thank Quote Answer

11/21/2019 7:06 AM	Rate (0)
Lapmaster Regular Member Joined: 11/30/2018 Last visit: 6/16/2020 Posts: 15 Rating: (0)	hi, yes, we have compiled offline. It shows no errors. Can you suggest me where can I find those errors? like math functions, datatype, etc Thanks, Vignesh

Suggestion To thank Quote Answer

11/21/2019 7:14 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 4/13/2021 Posts: 18956 Rating: (2371)	Hello, this is no compile error. The floating Point exception can caused by a wrong variable value . Division by 0 or something like that. Check the code of the unit which math or numeric operation with which variables you execute and check on the customer site which values are used. Regards Christoph

Suggestion To thank Quote Answer

11/22/2019 6:37 AM	Rate (0)
Lapmaster Regular Member Joined: 11/30/2018 Last visit: 6/16/2020 Posts: 15 Rating: (0)	HI, Thanks. We checked the same, a variable was given wrong datatype. Corrected that and issue was solved. Thanks, Vignesh RK.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on