Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

downgrade version of programm XWP CFC v6.0 --> v5.0

Created by: LukasRA at: 10/27/2016 1:54 PM (12 Replies)

Rating (3)

Thanks 4

Result pages:: |; 1 | 2; |

13 Entries

Entries per page: 10 | all

12/27/2019 10:12 PM	Rate (0)
C-3PO Experienced Member Joined: 5/30/2014 Last visit: 1/13/2021 Posts: 58 Rating: (2)	Albis Dear forum member, The Desigo Insight Management Station provides backward compatibility only. This means that e.g. Desigo Insight V5.1 supports all the old controller versions (V2.37, V4.0, …, but not the newer versions (V6.0). The only exception to the above statement is the Desigo Insight V5.1 Servicepack 2 with Hotfix H39. Installing Hotfix H39 allows to support the Desigo PX controller firmware V6.0 and DRA V1.2. Please see in the following FAQ: https://support.industry.siemens.com/cs/ww/en/view/109480767 (For the ones with Extranet or Intranet access only.) This hotfix really works!!! It helped me to import a v.6 PXC controller in Desigo v5. Versions: Desigo Insight V5.1 SP2 (BL204) Desigo XWORKS Plus v6.10.172
	If you find my contribution helpful please RATE it :))
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Pavel Rus

12/29/2020 11:23 PM	Rate (0)
jho-20000 Advanced Member Joined: 4/6/2019 Last visit: 1/3/2021 Posts: 42 Rating: (0)	hi ِDear me we downgrade pxc v6 to v5 after that program it with xwork 5 . It works without any problems

Suggestion To thank Quote Answer

1/4/2021 8:30 PM	Rate (0)
C-3PO Experienced Member Joined: 5/30/2014 Last visit: 1/13/2021 Posts: 58 Rating: (2)	How did you that? jho-20000 hi ِDear me we downgrade pxc v6 to v5 after that program it with xwork 5 . It works without any problems
	If you find my contribution helpful please RATE it :))
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on