7/17/2009 12:42 AM | |
Joined: 3/25/2008 Last visit: 1/28/2022 Posts: 232 Rating: (19) |
Hi there. Good luck. |
Keep working! |
|
7/17/2009 9:57 AM | |
Posts: 163 Rating: (0) |
I get the following error.I feel there is some problem in the downloading cable.CPU412-3H controller has one port MPI/PROFIBUS which can be configured as either of one. Attachment1 Hardware Download error.zip (156 Downloads) |
7/17/2009 11:46 AM | |
Posts: 325 Rating: (13) |
Hi Sindhu, Even I used to get kind og messages and basically the problem is with Set PG-PC interface. I suggest u have a look at the same. Regards Nil |
7/17/2009 12:23 PM | |
Posts: 163 Rating: (0) |
What is meant by SDB receiver,the error shows the SDB receiver may be in wrong mode |
7/20/2009 8:24 AM | |
Posts: 163 Rating: (0) |
Yes its PC Adapter MPI Cable (USB-MPI).But the local support says that it will support Profibus also?is that right? |
7/20/2009 9:19 AM | |
Joined: 3/21/2006 Last visit: 4/25/2024 Posts: 10228 Rating: (1181) |
Hello,
More in manual PC Adapter USB Regards, Hristo Mihalev |
Last edited by: UMENCHO at: 7/20/2009 9:20 AMBetter late then never! ;) |
|
7/24/2009 11:01 AM | |
Posts: 691 Rating: (36) |
For checking the HW congiguration downloaded properly or not? You can open the Hardware Configuration and go for 'online'. and for checking the Address settings:-
For Analog Values the count RAnge is 0-27648 (in decimal) 0-7FFF (in HEX) AttachmentONLINE.zip (125 Downloads) |
7/27/2009 6:05 AM | |
Posts: 163 Rating: (0) |
Thanku very much Niranjan...your reply is of gr8 help to me..... |
8/12/2009 6:09 AM | |
Posts: 163 Rating: (0) |
Moving the values to AO in the VAT table/Monitor/Modify,it say a peripheral output cannot be modified.Where should I move the values |
8/12/2009 7:25 AM | |
Posts: 163 Rating: (0) |
Confirm me whether what I have done is correct: AttachmentVAT_AI.zip (97 Downloads) |
Last edited by: Sindhu@KEAS-CBE at: 8/12/2009 7:42 AM |
|
8/12/2009 7:44 AM | |
Posts: 691 Rating: (36) |
Does those Addresses exists in your Hardware Configuration
AttachmentVAT_AI.zip (144 Downloads) |
8/12/2009 7:52 AM | |
Posts: 163 Rating: (0) |
Yes even AO shows the same indications.What does that mean
AttachmentVAT_AI.zip (131 Downloads) |
Last edited by: Sindhu@KEAS-CBE at: 8/12/2009 7:56 AM |
|
8/12/2009 4:40 PM | |
Posts: 163 Rating: (0) |
Snapshot of hardware configuration with addresses.Im not understanding what the problem is.Even i inject from the source,there is no change . In the analog value representation in current measuring ranges 4-20mA,If its 7FFF in HEX then it is overflow .So what should be checked if there is a overflow Attachmenterror.zip (150 Downloads) |
Last edited by: Sindhu at: 8/13/2009 7:04 AMLast edited by: Sindhu at: 8/13/2009 7:01 AM |
|
9/10/2009 6:25 AM | |
Posts: 382 Rating: (47) |
Dear Sindhu,
Please see the attach screenshot on how to transfer your program to the EPROM card and read this link /tf/WW/en/Posts/26251 Hope these helps! Attachmentscreenshot.zip (117 Downloads) |
Follow us on