Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Downloading Know-How protected code to PLC

Created by: Arek_Novita at: 5/2/2019 8:14 AM (3 Replies)

Rating (2)

Thanks 0

4 Entries

5/2/2019 8:14 AM	Rate (0)
Arek_Novita Member Joined: 4/16/2019 Last visit: 6/28/2019 Posts: 12 Rating: (0)	Hello, I have an ask: Can I download Know-How protected blocks to PLC? Will this work? I have a backup with PLC program but it has password and I don't know it. Thanks in advance for your answer, Arek

Suggestion To thank Quote Answer

5/2/2019 10:11 AM	Rate (1)
Willybong Bronze Member Joined: 2/11/2015 Last visit: 7/19/2019 Posts: 289 Rating: (19)	Hi Arek_Novita, If it is a block protected, you could download it with Step7 (with TIA PORTAL maybe it will need to compile before) But, If it is the PLC with password protected you couldn't download without the correct password. Trying to help, Guillem

Suggestion To thank Quote Answer

5/2/2019 10:20 AM	Rate (1)
mopS04 Platinum Expert Joined: 3/5/2014 Last visit: 7/19/2019 Posts: 3757 Rating: (666)	hi Arek_Novita, yes, know-how-protected blocks can be loaded from and to the PLC. The only thing that you can´t see the content of the blocks. hope this helps, regards,
	There is no bad feedback! Please rate!
Suggestion To thank Quote Answer

5/2/2019 11:34 AM	Rate (0)
Arek_Novita Member Joined: 4/16/2019 Last visit: 6/28/2019 Posts: 12 Rating: (0)	Thanks you both guys! Best Regards, Arek_Novita
	Last edited by: Arek_Novita at: 05/02/2019 11:35:17
Suggestion To thank Quote Answer

| |

Follow us on