Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Downloading problems CPU 1215C

Created by: Pink_panther at: 4/25/2015 11:45 AM (13 Replies)

Rating (0)

Thanks 1

Result pages:: |; 1 | 2; |

14 Entries

Entries per page: 10 | all

4/27/2015 9:52 AM	Rate (0)
Pink_panther Posts: 14 Rating: (0)	Hello, Please,could you describe more how to deactivate transferarea, i-slave mode because I don't need it. Regards Wladimir
Pink_panther Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

4/27/2015 10:05 AM	Rate (0)
Pink_panther Posts: 14 Rating: (0)	ChristophD "ok that's the error which interrupt the download. The PLC_2 is configured as i-Slave on the PROFIBUS and no Transferarea is created. If you need not transferarea or i-slave mod, deactivate it. To create the transferareas go in the properties of the PROFIBUS interface and then to I-Slave Configuration. Here you can create the Transfer Areas." Hello, Please,could you describe more how to deactivate transferarea, i-slave mode because I don't need it. Regards Wladimir
Pink_panther Posts: 14 Rating: (0)	Last edited by: Pink_panther at: 4/27/2015 10:06:11 AM
Suggestion To thank Quote Answer

4/27/2015 11:40 AM	Rate (0)
ChristophD Grandmaster Joined: 5/12/2006 Last visit: 4/18/2021 Posts: 18965 Rating: (2373)	Hello, delete the CM1243-5 in HWCN then it should work. The CM1243-5 is a DP-Slave Interface, if you project it in the station you must specify a master and the Transferareas. Regards Christoph
	Last edited by: ChristophD at: 4/27/2015 11:42:32 AM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users zerran

12/22/2017 8:19 AM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 4/16/2021 Posts: 4592 Rating: (82)	New question published by AutoGen007 is split to a separate thread with the subject S7 1215C - When trying to download, it drops the connection?. Best regards Jen_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on