7/28/2010 12:13 PM | |
Joined: 3/21/2006 Last visit: 4/25/2024 Posts: 10228 Rating: (1181) |
The IP data for the PROFINET interface is only retentive if the interface has been configured in HW Config and this configuration is also loaded on the IM 151-8 PN/DP CPU interface module, i.e. the SDBs must be available on the SIMATIC Micro Memory Card. Look at How can you load projects to a memory card and back again to a PG/PC? What about the program which you downloeded there? Do you use there any I/O? In the beginning you could download to the CPU some OBs - 80 to 89, also 121+122. Just to see what's happend there... Best regards, Hristo Mihalev |
7/28/2010 1:11 PM | |
Posts: 12 Rating: (0) |
HI I have tried to download a very simple code in OB1. And only download OB1. But it still makes the error. STL code in OB1: SET S M99.0 |
7/28/2010 2:08 PM | |
Posts: 12 Rating: (0) |
I’m missing the Busterminator, it’s on site in the electrical cabinet. Thanks, I’m not use to the IM151-8 CPU yet, normal I use 300 and 400 CPU’s. |
11/1/2011 2:19 PM | |
Joined: 8/21/2008 Last visit: 3/18/2024 Posts: 141 Rating: (6) |
Dear Wizard,
I used a MMC card of 128kB size. I tried downloading the IP configuration from the HW configutation and also tried using a Primary Setup Tool from a linkhere Even using both the condition, the IP is resetting to 0.0.0.0 after the power Off
No, Since I was new to this controller i thought that the Bus termination module need to be add only if you dont use any IO modules. I am wrong and I now knew that I need to add that bustermination module to clear the I/O error. But what about the IP reset issue? Does it got anything todo with the bus termination module? Pls Help!!! rgds, RBM
|
11/1/2011 2:25 PM | |
Joined: 4/24/2006 Last visit: 4/26/2024 Posts: 8616 Rating: (1147)
|
Hello, I would recommend to use Bustermination module, perhaps it can influence anything. Perhaps an update of Operating System could work. Operating System Updates for IM151-8 PN/DP CPU (6ES7151-8AB01-0AB0) Best regards, Wizard |
Follow us on