Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Fault 20005 Simotion

Created by: manningcub at: 3/1/2018 1:22 PM (5 Replies)

Rating (0)

Thanks 1

6 Entries

3/1/2018 1:22 PM	Rate (0)
manningcub Bronze Member Joined: 4/4/2015 Last visit: 3/19/2020 Posts: 79 Rating: (0)	Hello to all, What can be the reason for fault 20005 Device type 3 addresses 65535 faulted.( bit : 0 , encoder number 0, reason 0x0h) Best Regrads, M

Suggestion To thank Quote Answer

3/1/2018 1:30 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 4/8/2020 Posts: 17618 Rating: (2134)	Hello, invalid Adress. Regards Christoph

Suggestion To thank Quote Answer

3/1/2018 1:38 PM	Rate (0)
manningcub Bronze Member Joined: 4/4/2015 Last visit: 3/19/2020 Posts: 79 Rating: (0)	Sorry, but how to fix that? Which address?

Suggestion To thank Quote Answer

3/1/2018 1:41 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 4/8/2020 Posts: 17618 Rating: (2134)	this can only be solved if you give more informations 1) which Version of Simotion 2) which Simotion you use 3) on which TO you get the fault Regards Christoph

Suggestion To thank Quote Answer

3/1/2018 1:43 PM	Rate (0)
manningcub Bronze Member Joined: 4/4/2015 Last visit: 3/19/2020 Posts: 79 Rating: (0)	D435 2DP-PN, Simotion v5.1 TO : axis

Suggestion To thank Quote Answer

3/1/2018 1:46 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 4/8/2020 Posts: 17618 Rating: (2134)	real plc or simosim? can it be that you activate the HW END Switch and configure no adress for it?

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users manningcub

|

Share this page:

Share this page on...

Follow us on