Skip to Content

support.automation.siemens.com | Technical Forum | Thursday, January 28, 2021 3:36:08 AM

Print

Fault records over IEC103 in RTU560 ABB

Created by: Alex_W at: 10/9/2015 8:12 AM (6 Replies)

Rating (0)

Thanks 1

7 Entries

10/9/2015 8:12 AM	Rate (0)
Alex_W Posts: 5 Rating: (0)	Could you help with the next question. We have set up collection oscillographic fault record over protocol IEC 60870-5-103 from Siprotec 7SJ62 relay to of the controller RTU560 (manufacture ABB). Then, the fault record file we can be downloaded from RTU560 through the WEB-interface. But the resulting file is not format COMTRADE (ASCII). View them in the SIGRA no opportunity. Most likely the fault record file are obtained in a special format. For example, we downloaded the same way waveform relay REF542 +. From ABB sent us a special tool to convert these files to COMTRADE format. Could you provide a similar utility to switch Siprotec. I share the file. Thanks. Attachment Fault 00001.zip (89 Downloads)
Alex_W Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

10/16/2015 9:45 AM	Rate (0)
Alex_W Posts: 5 Rating: (0)	Hello all! I am sorry that no one has ideas. I will add more information on this subject. The same fault record in COMTRADE (exports from Digsi) - Comtrade.zip Attachment Comtrade.zip (76 Downloads)
Alex_W Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

10/16/2015 9:46 AM	Rate (0)
Alex_W Posts: 5 Rating: (0)	The files are available in Digsi - path "proj\P7DI\GV\ST\00000002\SAMPLES\FAULT " - fr.zip. I want to note that the files "Fault 00001" and "FR000001.SFP" have similar fragments. I look forward to any suggestions and ideas. Attachment fr.zip (76 Downloads)
Alex_W Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

10/26/2015 12:12 PM	Rate (0)
Alex_W Posts: 5 Rating: (0)	Resolved
Alex_W Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

10/26/2015 4:20 PM	Rate (0)
Mike J Platinum Expert Joined: 10/9/2007 Last visit: 1/27/2021 Posts: 1118 Rating: (103)	Hi Alex although I guess you didn't solve it with Information from this Forum, it would be nice to know that you did to solve the problem
	Energy Automation products: Sicam, Siprotec, Digsi
Suggestion To thank Quote Answer

10/27/2015 8:04 AM	Rate (0)
Alex_W Posts: 5 Rating: (0)	Hi, Mike. ABB sent the necessary soft.
Alex_W Posts: 5 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Mike J

7/29/2020 7:33 PM	Rate (0)
Rinu Ravikumar Va... Member Joined: 7/29/2020 Last visit: 7/29/2020 Posts: 1 Rating: (0)	What software was sent. I have an RTU560 storing the files. Alex_W Hi, Mike. ABB sent the necessary soft.

Suggestion To thank Quote Answer