Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

FM 458 UF ERROR

Created by: Mohamed Elbanna at: 3/31/2013 4:16 PM (7 Replies)

Rating (0)

Thanks 1

8 Entries

3/31/2013 4:16 PM	Rate (0)
Mohamed Elbanna Member Joined: 3/31/2013 Last visit: 4/1/2013 Posts: 3 Rating: (0)	Hello i have problem in FM458 module usen in CUP S7 Module SPPA T200 DCS where panel power supply lost before now power ok but we get UF error led bright i checked manual and found mean user error >>and all related signals are faulty,,,, please help me to remove this i tried to make acknowledge but not reset im new on this system Attachment IMG_1184[2].JPG (96 Downloads)

Suggestion To thank Quote Answer

4/1/2013 6:51 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 10/16/2019 Posts: 1929 Rating: (208)	Hello. Have a look at this thread: Siemens Energy Customer Support Center - SPPA T3000, SICAM PAS, ...

Suggestion To thank Quote Answer

4/1/2013 9:25 AM	Rate (0)
Mohamed Elbanna Member Joined: 3/31/2013 Last visit: 4/1/2013 Posts: 3 Rating: (0)	please i need help from you , have i download program again or what i can do ..my plant is stopped

Suggestion To thank Quote Answer

4/1/2013 9:41 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 10/16/2019 Posts: 1929 Rating: (208)	I am not familiar with SPPA system. I can suppose only that you need to find USF function block in the FM458 program and check the value at its input IS. If input is non-zero, then UF-led flashs.

Suggestion To thank Quote Answer

4/1/2013 10:12 AM	Rate (0)
Mohamed Elbanna Member Joined: 3/31/2013 Last visit: 4/1/2013 Posts: 3 Rating: (0)	UF led is already yellow on ... and the controller program is faulty and all related signals coming from ADDFEM module are faulty .what i can do to clear this error and normalize all signals note: this not SPPA T 3000 it is SPPA T2000 (Step 7 ) Thanks for your support Best Regards Mohamed

Suggestion To thank Quote Answer

9/3/2013 8:47 AM	Rate (0)
VanThinh Member Joined: 4/22/2011 Last visit: 9/10/2013 Posts: 5 Rating: (0)	Hi, How is your plant now ? With above problem. I think you should compile/download for FM again. Regards Van Thinh

Suggestion To thank Quote Answer

6/3/2019 8:13 AM	Rate (0)
AutoGen_332297 Member Joined: 11/28/2015 Last visit: 6/10/2019 Posts: 2 Rating: (0)	Hello The thread link is empty. Thanks

Suggestion To thank Quote Answer

6/3/2019 9:34 AM	Rate (0)
Hulzhex Gold Member Joined: 8/25/2005 Last visit: 10/9/2019 Posts: 1139 Rating: (106)	Hello AutoGen_332297, please describe a little bit more detailed what you are trying to say. There is only one link at this page Siemens Energy Customer Support Center - SPPA T3000, SICAM PAS, ... and as far as I can see, it is working. The link so refering to another thread within the forum. Best regards Sabine

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users HAMIDF

| |

Follow us on